Post Stock Login Register

ASTM A959 XM-6 vs ASTM A959 SS410

Close Alternative — 84.9% match based on chemical composition and mechanical property overlap.

ASTM A959 XM-6 (ASTM A959:2011) and ASTM A959 SS410 (ASTM A959:2011) are both steel grades. Both fall under the Stainless Steel category. ASTM A959 XM-6 is typically used for wrought stainless steel products; recommended composition limits for adoption by product standards (clause 1.1), while ASTM A959 SS410 is commonly used for cutlery, turbine blades, surgical instruments, fasteners. ASTM A959 XM-6 is defined under ASTM International, originating from United States, while ASTM A959 SS410 is defined under ASTM International, originating from United States.

As per chemical composition, ASTM A959 XM-6 vs ASTM A959 SS410 is a 87.4% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a close alternative overall at 84.9%.

Frequently Compared With ASTM A959 XM-6:
GB/T 3280 06Cr19Ni10 EN 10088-1 1.4301 EN 10088-1 1.4845 IS 1570 (Part 7) 12Cr12MoH IS 1570 (Part 7) 12Cr13H GOST 5632 06Kh23N28 GOST 5632 08X18H10 IS 1570 (Part 7) 11Cr17Ni13W3TiH EN 10088-1 1.4401 ASTM A959 .- EN 10088-1 1.4006 IS 1570 (Part 7) 12Cr12MoVH
Match Breakdown
CHEMISTRY MATCH
87.4%
MECHANICAL MATCH
No shared data
OVERALL
84.9%
Specifications
Property ASTM A959 XM-6 ASTM A959 SS410
Standard ASTM A959:2011 ASTM A959:2011
Category Stainless Steel Stainless Steel
C (%) <=0.15 <=0.15
Cr (%) 12.0-14.0 11.5-13.5
Mn (%) 1.50-2.50 <=1.00
P (%) <=0.06 <=0.040
S (%) >=0.15 <=0.030
Si (%) <=1.00 <=1.00
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Typical Applications
ASTM A959 XM-6
Wrought stainless steel products; recommended composition limits for adoption by product standards (clause 1.1)
ASTM A959 SS410
Cutlery, turbine blades, surgical instruments, fasteners
Can ASTM A959 XM-6 Be Substituted With ASTM A959 SS410?
ASTM A959 XM-6 and ASTM A959 SS410 are a close alternative rather than a direct substitute. Some properties overlap well, but check the specific chemistry and mechanical rows above against your application's requirements before treating them as interchangeable.
Forms & Sizes Available on M-EX
ASTM A959 XM-6
No active listings currently.
ASTM A959 SS410
Round Bar → (3 listings)
Diameter: 40–40 mm (1.57–1.57 in)
Length: 2800–3300 mm (110.24–129.92 in)
On M-EX Right Now
ASTM A959 XM-6
0 active listings and RFQs →
ASTM A959 SS410
3 active listings and RFQs →
Frequently Asked Questions
What is the difference between ASTM A959 XM-6 and ASTM A959 SS410?
Both grades share a similar composition profile; see the specification table above for the exact chemistry and mechanical property values.
Can ASTM A959 XM-6 be substituted with ASTM A959 SS410?
ASTM A959 XM-6 and ASTM A959 SS410 are a close alternative rather than a direct substitute. Some properties overlap well, but check the specific chemistry and mechanical rows above against your application's requirements before treating them as interchangeable.