Post Stock Login Register

BS 4659 BD3 vs GB/T 1299 4Cr5MoSiV1

Minimal Match — 35% match based on chemical composition and mechanical property overlap.

BS 4659 BD3 (BS 4659:1989) and GB/T 1299 4Cr5MoSiV1 (GB/T 1299-2014) are both steel grades. Both fall under the Tool & Die Steels category. BS 4659 BD3 is typically used for blanking dies, forming tools, gauges, while GB/T 1299 4Cr5MoSiV1 is commonly used for die casting dies, forging dies, extrusion tools. BS 4659 BD3 is defined under British Standards (BS), originating from United Kingdom, while GB/T 1299 4Cr5MoSiV1 is defined under Guobiao Standards (GB/T), originating from China.

As per chemical composition, BS 4659 BD3 vs GB/T 1299 4Cr5MoSiV1 is a 59.5% match. As per mechanical properties, the match is 0%. Combined, this makes them a minimal match overall at 35%.

Frequently Compared With BS 4659 BD3:
EN ISO 4957 1.2316 DIN EN ISO 4957 1.2379 GOST 5950 4H5MFS1 GOST 5950 4H5MFS AISI 52100 GB/T 1299 3Cr2W8V GOST 5950 3H2W8F EN ISO 683-17 100Cr6 DIN EN ISO 4957 1.2344 GB/T 1299 4Cr5MoSiV IS 1570 (Part 6) 103T3 IS 1570 (Part 6) 118T3
Match Breakdown
CHEMISTRY MATCH
59.5%
MECHANICAL MATCH
0%
OVERALL
35%
Specifications
Property BS 4659 BD3 GB/T 1299 4Cr5MoSiV1
Standard BS 4659:1989 GB/T 1299-2014
Category Tool & Die Steels Tool & Die Steels
C (%) 2.00–2.35 0.32–0.45
Mn (%) ≤0.60 0.20–0.50
Cr (%) 11.00–13.50 4.75–5.50
Si (%) ≤0.60 0.80–1.20
Mo (%) Not specified 1.20–1.75
V (%) Not specified 0.80–1.20
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property BS 4659 BD3 GB/T 1299 4Cr5MoSiV1
Hardness HRC (hardened) 58–64 42–54
Hardness HB (annealed) ≤255 ≤235
Typical Applications
BS 4659 BD3
Blanking dies, forming tools, gauges
GB/T 1299 4Cr5MoSiV1
Die casting dies, forging dies, extrusion tools
Key Differences
Can BS 4659 BD3 Be Substituted With GB/T 1299 4Cr5MoSiV1?
BS 4659 BD3 and GB/T 1299 4Cr5MoSiV1 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
Forms & Sizes Available on M-EX
BS 4659 BD3
Round Bar → (2 listings)
Diameter: 80–80 mm (3.15–3.15 in)
Length: 3100–3100 mm (122.05–122.05 in)
GB/T 1299 4Cr5MoSiV1
Round Bar → (2 listings)
Diameter: 80–80 mm (3.15–3.15 in)
Length: 2700–4100 mm (106.3–161.42 in)
On M-EX Right Now
BS 4659 BD3
2 active listings and RFQs →
GB/T 1299 4Cr5MoSiV1
2 active listings and RFQs →
Frequently Asked Questions
What is the difference between BS 4659 BD3 and GB/T 1299 4Cr5MoSiV1?
GB/T 1299 4Cr5MoSiV1 specifies Mo, V which are not specified for BS 4659 BD3.
Can BS 4659 BD3 be substituted with GB/T 1299 4Cr5MoSiV1?
BS 4659 BD3 and GB/T 1299 4Cr5MoSiV1 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.