Post Stock Login Register

BS 4659 BH21 vs IS 1570 (Part 6) T50W8Cr5V2

Related Material — 62.2% match based on chemical composition and mechanical property overlap.

BS 4659 BH21 (BS 4659:1989) and IS 1570 (Part 6) T50W8Cr5V2 (IS 1570 (Part 6):1996) are both steel grades. Both fall under the Tool & Die Steels category. BS 4659 BH21 is defined under British Standards (BS), originating from United Kingdom, while IS 1570 (Part 6) T50W8Cr5V2 is defined under Bureau of Indian Standards (IS), originating from India.

As per chemical composition, BS 4659 BH21 vs IS 1570 (Part 6) T50W8Cr5V2 is a 62.2% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a related material overall at 62.2%.

Frequently Compared With BS 4659 BH21:
GB/T 1299 3Cr2W8V GOST 5950 4H5MFS1 EN ISO 4957 1.2316 GOST 5950 3H2W8F GOST 5950 4H5MFS AISI 52100 EN ISO 683-17 100Cr6 DIN EN ISO 4957 1.2379 GB/T 1299 4Cr5MoSiV1 DIN EN ISO 4957 1.2344 GB/T 1299 4Cr5MoSiV IS 1570 (Part 6) 103T3
Match Breakdown
CHEMISTRY MATCH
62.2%
MECHANICAL MATCH
No shared data
OVERALL
62.2%
Specifications
Property BS 4659 BH21 IS 1570 (Part 6) T50W8Cr5V2
Standard BS 4659:1989 IS 1570 (Part 6):1996
Category Tool & Die Steels Tool & Die Steels
C (%) 0.26–0.36 0.45-0.55
Mn (%) 0.15–0.40 0.20-0.40
Cr (%) 3.00–3.75 1.00-1.50
W (%) 8.50–10.00 1.75-2.25
V (%) 0.30–0.60 0.10-0.25
Si (%) Not specified 0.50-1.00
P (%) Not specified <=0.035
S (%) Not specified <=0.035
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property BS 4659 BH21 IS 1570 (Part 6) T50W8Cr5V2
Hardness HRC (hardened) 36–54 Not specified
Hardness HB (annealed) ≤229 Not specified
Typical Applications
BS 4659 BH21
Hot extrusion dies, brass/bronze forging dies
IS 1570 (Part 6) T50W8Cr5V2
Not documented
Key Differences
Can BS 4659 BH21 Be Substituted With IS 1570 (Part 6) T50W8Cr5V2?
BS 4659 BH21 and IS 1570 (Part 6) T50W8Cr5V2 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
Forms & Sizes Available on M-EX
BS 4659 BH21
Round Bar → (2 listings)
Diameter: 80–80 mm (3.15–3.15 in)
Length: 4400–4600 mm (173.23–181.1 in)
IS 1570 (Part 6) T50W8Cr5V2
No active listings currently.
On M-EX Right Now
BS 4659 BH21
2 active listings and RFQs →
IS 1570 (Part 6) T50W8Cr5V2
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between BS 4659 BH21 and IS 1570 (Part 6) T50W8Cr5V2?
IS 1570 (Part 6) T50W8Cr5V2 specifies Si, P, S which are not specified for BS 4659 BH21.
Can BS 4659 BH21 be substituted with IS 1570 (Part 6) T50W8Cr5V2?
BS 4659 BH21 and IS 1570 (Part 6) T50W8Cr5V2 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.