Post Stock Login Register

BS 970 (Part 1) 080M46 vs BS 970 (Part 1) 040A04

Related Material — 69.9% match based on chemical composition and mechanical property overlap.

BS 970 (Part 1) 080M46 (BS 970 (Part 1):1983) and BS 970 (Part 1) 040A04 (BS 970 (Part 1):1991) are both steel grades. Both fall under the Carbon Steel category. BS 970 (Part 1) 080M46 is typically used for used for crankshafts, connecting rods, spindles, gears, shafts, and machine tools., while BS 970 (Part 1) 040A04 is commonly used for as-rolled, or as-rolled and softened, steel (section two). BS 970 (Part 1) 080M46 is defined under British Standards (BS), originating from United Kingdom, while BS 970 (Part 1) 040A04 is defined under British Standards (BS), originating from United Kingdom.

As per chemical composition, BS 970 (Part 1) 080M46 vs BS 970 (Part 1) 040A04 is a 85.7% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a related material overall at 69.9%.

Frequently Compared With BS 970 (Part 1) 080M46:
BS 970 (Part 3) 070M55 BS 970 (Part 1) 040A10 BS 970 (Part 1) 080A20 BS 970 (Part 3) 045M10 BS 970 (Part 1) 060A45 BS 970 (Part 1) 045M10 BS 970 (Part 1) 045M10 BS 970 (Part 1) 055M15 BS 970 (Part 1) 040A12 BS 970 (Part 1) 045A10 BS 970 (Part 1) 045A10 BS 970 (Part 3) 045A10
Match Breakdown
CHEMISTRY MATCH
85.7%
MECHANICAL MATCH
No shared data
OVERALL
69.9%
Specifications
Property BS 970 (Part 1) 080M46 BS 970 (Part 1) 040A04
Standard BS 970 (Part 1):1983 BS 970 (Part 1):1991
Category Carbon Steel Carbon Steel
C (%) 0.42-0.50 <=0.08
Mn (%) 0.60-1.00 0.30-0.50
P (%) <=0.050 Not specified
S (%) <=0.050 Not specified
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Typical Applications
BS 970 (Part 1) 080M46
Used for crankshafts, connecting rods, spindles, gears, shafts, and machine tools.
BS 970 (Part 1) 040A04
As-rolled, or as-rolled and softened, steel (section two)
Key Differences
Can BS 970 (Part 1) 080M46 Be Substituted With BS 970 (Part 1) 040A04?
BS 970 (Part 1) 080M46 and BS 970 (Part 1) 040A04 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
Forms & Sizes Available on M-EX
BS 970 (Part 1) 080M46
Round Bar → (2 listings)
Diameter: 40–40 mm (1.57–1.57 in)
Length: 5900–6600 mm (232.28–259.84 in)
BS 970 (Part 1) 040A04
No active listings currently.
On M-EX Right Now
BS 970 (Part 1) 080M46
2 active listings and RFQs →
BS 970 (Part 1) 040A04
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between BS 970 (Part 1) 080M46 and BS 970 (Part 1) 040A04?
BS 970 (Part 1) 080M46 specifies P, S which are not specified for BS 970 (Part 1) 040A04.
Can BS 970 (Part 1) 080M46 be substituted with BS 970 (Part 1) 040A04?
BS 970 (Part 1) 080M46 and BS 970 (Part 1) 040A04 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.