Minimal Match — 35% match
based on chemical composition and mechanical property overlap.
BS 970 (Part 1) 316S13 (BS 970 (Part 1):1983) and GOST 5632 06Kh23N28 (GOST 5632-2014) are both steel grades.
Both fall under the Stainless Steel category.
BS 970 (Part 1) 316S13 is typically used for austenitic stainless and heat resisting steel for mechanical and allied engineering purposes (table 14, with table 15 for the cold drawn condition)., while GOST 5632 06Kh23N28 is commonly used for furnace components, heat exchangers, high temperature applications.
BS 970 (Part 1) 316S13 is defined under British Standards (BS) (United Kingdom).
As per chemical composition, BS 970 (Part 1) 316S13 vs GOST 5632 06Kh23N28 is a 59.6% match.
Mechanical property data is not available for both grades, so this factor could not be scored.
Combined, this makes them a minimal match overall at 35%.
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property
BS 970 (Part 1) 316S13
GOST 5632 06Kh23N28
Tensile Strength
Not specified
≥510 MPa
Yield Strength
Not specified
≥196 MPa
Elongation
Not specified
≥35%
Max Service Temp
Not specified
1050°C
Typical Applications
BS 970 (Part 1) 316S13
Austenitic stainless and heat resisting steel for mechanical and allied engineering purposes (Table 14, with Table 15 for the cold drawn condition).
GOST 5632 06Kh23N28
Furnace components, heat exchangers, high temperature applications
Key Differences
BS 970 (Part 1) 316S13 specifies P, S, Mo which are not specified for GOST 5632 06Kh23N28.
Can BS 970 (Part 1) 316S13 Be Substituted With GOST 5632 06Kh23N28?
BS 970 (Part 1) 316S13 and GOST 5632 06Kh23N28 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
What is the difference between BS 970 (Part 1) 316S13 and GOST 5632 06Kh23N28?
BS 970 (Part 1) 316S13 specifies P, S, Mo which are not specified for GOST 5632 06Kh23N28.
Can BS 970 (Part 1) 316S13 be substituted with GOST 5632 06Kh23N28?
BS 970 (Part 1) 316S13 and GOST 5632 06Kh23N28 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.