Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Chemical Composition (%)
C
Si
Mn
P
S
Cr
Ni
0.14-0.20
<=1.0
<=1.0
<=0.040
<=0.030
11.5-13.5
<=1.00
More data from BS 970 (Part 1):1983
From the standard
Mechanical properties by heat treatment condition
Condition
Limiting ruling section (mm)
Heat treatment
Rm (N/mm2)
Re min (N/mm2)
A min (%)
Izod min (ft lbf)
KCV min (J)
Rp0.2 min (N/mm2), when specifically ordered
HB
R
150
Harden 950-1020 deg C (oil or air), temper 650-750 deg C (notes 33, 34)
700-850
525
15
<=63 mm: 25; >63 mm: 20
-
495
201-255
S
29
Harden 950-1020 deg C (oil or air), temper 600-700 deg C (notes 33, 34)
775-925
585
13
20
-
555
223-277
All Table 13 steels are category 1. Rp0.2 applies when specifically ordered (note 10). 1 N/mm2 = 1 MPa.
Source: BS 970 (Part 1):1983, Table 13
Hardness, softened condition
Hardness HB, softened condition
217 max
Source: BS 970 (Part 1):1983, Table 13
Comparison with earlier editions
BS 970:1970/72 designation
420S29
BS 970:1955 En No.
56B
Appendix D note 47: where a comparison is made the steels are not necessarily equivalent. 'Not listed' means the earlier edition has no entry under this designation.
Source: BS 970 (Part 1):1983, Appendix D
Active BS 970 (Part 1):1983 420S29 Listings on M-EX (For Sale)