Strong Match — 87.7% match
based on chemical composition and mechanical property overlap.
BS 970 (Part 1) 606M36 (BS 970 (Part 1):1983) and BS 970 EN16 (BS 970:1955) are both steel grades.
Both fall under the Alloy Steel category.
BS 970 (Part 1) 606M36 is typically used for through hardening steel for mechanical and allied engineering purposes; supplied in the hardened and tempered conditions of table 6., while BS 970 EN16 is commonly used for high tensile bolts, studs, general engineering.
BS 970 (Part 1) 606M36 is defined under British Standards (BS), originating from United Kingdom, while BS 970 EN16 is defined under British Standards (BS), originating from United Kingdom.
As per chemical composition, BS 970 (Part 1) 606M36 vs BS 970 EN16 is a 87.7% match.
Mechanical property data is not available for both grades, so this factor could not be scored.
Combined, this makes them a strong match overall at 87.7%.
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property
BS 970 (Part 1) 606M36
BS 970 EN16
Tensile Strength
Not specified
≥695 MPa (45 tons/sq in, converted)
Yield Strength
Not specified
≥525 MPa (34 tons/sq in, converted)
Elongation
Not specified
≥22%
Hardness
Not specified
201-255 HB
Condition
Not specified
Hardened and tempered R, ruling section 6 in (lowest-strength condition of the standard)
Typical Applications
BS 970 (Part 1) 606M36
Through hardening steel for mechanical and allied engineering purposes; supplied in the hardened and tempered conditions of Table 6.
BS 970 EN16
High tensile bolts, studs, general engineering
Can BS 970 (Part 1) 606M36 Be Substituted With BS 970 EN16?
BS 970 (Part 1) 606M36 and BS 970 EN16 overlap closely enough on chemistry and mechanical properties that BS 970 EN16 is often considered as a substitute for BS 970 (Part 1) 606M36 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.
What is the difference between BS 970 (Part 1) 606M36 and BS 970 EN16?
Both grades share a similar composition profile; see the specification table above for the exact chemistry and mechanical property values.
Can BS 970 (Part 1) 606M36 be substituted with BS 970 EN16?
BS 970 (Part 1) 606M36 and BS 970 EN16 overlap closely enough on chemistry and mechanical properties that BS 970 EN16 is often considered as a substitute for BS 970 (Part 1) 606M36 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.