Post Stock Login Register

BS 970 (Part 1) 040A10 vs BS 970 (Part 1) 045A10

Strong Match — 98.1% match based on chemical composition and mechanical property overlap.

BS 970 (Part 1) 040A10 (BS 970 (Part 1):1991) and BS 970 (Part 1) 045A10 (BS 970 (Part 1):1983) are both steel grades. Both fall under the Carbon Steel category. BS 970 (Part 1) 040A10 is typically used for used for bolts, studs, shafts, brackets, fabricated components, and general engineering parts., while BS 970 (Part 1) 045A10 is commonly used for case hardening steel for mechanical and allied engineering purposes (table 11 mechanical properties).. BS 970 (Part 1) 040A10 is defined under British Standards (BS), originating from United Kingdom, while BS 970 (Part 1) 045A10 is defined under British Standards (BS), originating from United Kingdom.

As per chemical composition, BS 970 (Part 1) 040A10 vs BS 970 (Part 1) 045A10 is a 98.1% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a strong match overall at 98.1%.

Frequently Compared With BS 970 (Part 1) 040A10:
BS 970 (Part 3) 070M55 BS 970 (Part 1) 080A20 BS 970 (Part 1) 055M15 BS 970 (Part 1) 040A12 BS 970 (Part 1) 045M10 BS 970 (Part 1) 060A62 BS 970 (Part 1) 070A67 BS 970 (Part 1) 045M10 BS 970 (Part 3) 045M10 BS 970 (Part 1) 060A78 BS 970 (Part 1) 045A10 BS 970 (Part 1) 080A15
Match Breakdown
CHEMISTRY MATCH
98.1%
MECHANICAL MATCH
No shared data
OVERALL
98.1%
Specifications
Property BS 970 (Part 1) 040A10 BS 970 (Part 1) 045A10
Standard BS 970 (Part 1):1991 BS 970 (Part 1):1983
Category Carbon Steel Carbon Steel
C (%) 0.08-0.13 0.08-0.13
Mn (%) 0.30-0.50 0.30-0.60
P (%) Not specified <=0.050
S (%) Not specified <=0.050
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Typical Applications
BS 970 (Part 1) 040A10
Used for bolts, studs, shafts, brackets, fabricated components, and general engineering parts.
BS 970 (Part 1) 045A10
Case hardening steel for mechanical and allied engineering purposes (Table 11 mechanical properties).
Key Differences
Can BS 970 (Part 1) 040A10 Be Substituted With BS 970 (Part 1) 045A10?
BS 970 (Part 1) 040A10 and BS 970 (Part 1) 045A10 overlap closely enough on chemistry and mechanical properties that BS 970 (Part 1) 045A10 is often considered as a substitute for BS 970 (Part 1) 040A10 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.
Forms & Sizes Available on M-EX
BS 970 (Part 1) 040A10
Round Bar → (2 listings)
Diameter: 40–40 mm (1.57–1.57 in)
Length: 4700–5500 mm (185.04–216.54 in)
BS 970 (Part 1) 045A10
No active listings currently.
On M-EX Right Now
BS 970 (Part 1) 040A10
2 active listings and RFQs →
BS 970 (Part 1) 045A10
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between BS 970 (Part 1) 040A10 and BS 970 (Part 1) 045A10?
BS 970 (Part 1) 045A10 specifies P, S which are not specified for BS 970 (Part 1) 040A10.
Can BS 970 (Part 1) 040A10 be substituted with BS 970 (Part 1) 045A10?
BS 970 (Part 1) 040A10 and BS 970 (Part 1) 045A10 overlap closely enough on chemistry and mechanical properties that BS 970 (Part 1) 045A10 is often considered as a substitute for BS 970 (Part 1) 040A10 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.