Post Stock Login Register

BS 970 (Part 1) 070A67 vs BS 970 EN43E

Strong Match — 93.3% match based on chemical composition and mechanical property overlap.

BS 970 (Part 1) 070A67 (BS 970 (Part 1):1991) and BS 970 EN43E (BS 970:1955) are both steel grades. Both fall under the Carbon Steel category. BS 970 (Part 1) 070A67 is defined under British Standards (BS), originating from United Kingdom, while BS 970 EN43E is defined under British Standards (BS), originating from United Kingdom.

As per chemical composition, BS 970 (Part 1) 070A67 vs BS 970 EN43E is a 93.3% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a strong match overall at 93.3%.

Frequently Compared With BS 970 (Part 1) 070A67:
BS 970 (Part 1) 040A10 BS 970 (Part 1) 040A12 BS 970 (Part 1) 045A10 BS 970 (Part 1) 060A67 BS 970 (Part 1) 040A04 BS 970 (Part 3) 045M10 BS 970 (Part 1) 055M15 BS 970 (Part 1) 060A62 BS 970 (Part 1) 060A72 BS 970 (Part 1) 045M10 BS 970 (Part 1) 060A78 BS 970 (Part 3) 045A10
Match Breakdown
CHEMISTRY MATCH
93.3%
MECHANICAL MATCH
No shared data
OVERALL
93.3%
Specifications
Property BS 970 (Part 1) 070A67 BS 970 EN43E
Standard BS 970 (Part 1):1991 BS 970:1955
Category Carbon Steel Carbon Steel
C (%) 0.65-0.70 0.65-0.70
Mn (%) 0.70-0.90 0.70-0.90
Si (%) Not specified 0.05-0.35
S (%) Not specified <=0.060
P (%) Not specified <=0.060
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Typical Applications
BS 970 (Part 1) 070A67
As-rolled, or as-rolled and softened, steel (section two)
BS 970 EN43E
Not documented
Key Differences
Can BS 970 (Part 1) 070A67 Be Substituted With BS 970 EN43E?
BS 970 (Part 1) 070A67 and BS 970 EN43E overlap closely enough on chemistry and mechanical properties that BS 970 EN43E is often considered as a substitute for BS 970 (Part 1) 070A67 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.
On M-EX Right Now
BS 970 (Part 1) 070A67
0 active listings and RFQs →
BS 970 EN43E
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between BS 970 (Part 1) 070A67 and BS 970 EN43E?
BS 970 EN43E specifies Si, S, P which are not specified for BS 970 (Part 1) 070A67.
Can BS 970 (Part 1) 070A67 be substituted with BS 970 EN43E?
BS 970 (Part 1) 070A67 and BS 970 EN43E overlap closely enough on chemistry and mechanical properties that BS 970 EN43E is often considered as a substitute for BS 970 (Part 1) 070A67 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.