Post Stock Login Register

BS 970 (Part 1) 170H41 vs BS 970 (Part 1) 170H36

Strong Match — 91.4% match based on chemical composition and mechanical property overlap.

BS 970 (Part 1) 170H41 (BS 970 (Part 1):1991) and BS 970 (Part 1) 170H36 (BS 970 (Part 1):1983) are both steel grades. Both fall under the Alloy Steel category. BS 970 (Part 1) 170H41 is typically used for through hardening boron steel (section three), while BS 970 (Part 1) 170H36 is commonly used for through hardening steel for mechanical and allied engineering purposes (table 6 gives composition only; see the hardenability tables).. BS 970 (Part 1) 170H41 is defined under British Standards (BS), originating from United Kingdom, while BS 970 (Part 1) 170H36 is defined under British Standards (BS), originating from United Kingdom.

As per chemical composition, BS 970 (Part 1) 170H41 vs BS 970 (Part 1) 170H36 is a 91.4% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a strong match overall at 91.4%.

Frequently Compared With BS 970 (Part 1) 170H41:
IS 1570 (Part 4) 103Cr6 IS 1570 (Part 4) 103Cr4 IS 4367 10Cr9Mo10 IS 1570 (Part 7) 10Mo6H IS 4367 07Cr4Mo6 IS 1570 (Part 4) 07Cr4Mo6 NF A35-565 100C6 UNI 11234 100Cr6 IS 1570 (Part 4) 105Cr5 IS 1570 (Part 4) 10Cr20Mo6 IS 1570 (Part 7) 10Cr36Mo10H IS 1570 (Part 4) 10Mo6
Match Breakdown
CHEMISTRY MATCH
91.4%
MECHANICAL MATCH
No shared data
OVERALL
91.4%
Specifications
Property BS 970 (Part 1) 170H41 BS 970 (Part 1) 170H36
Standard BS 970 (Part 1):1991 BS 970 (Part 1):1983
Category Alloy Steel Alloy Steel
C (%) 0.37-0.44 0.32-0.39
Mn (%) 0.80-1.10 0.80-1.10
B (%) 0.0005-0.005 0.0005-0.005
P (%) Not specified <=0.035
S (%) Not specified <=0.040
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Typical Applications
BS 970 (Part 1) 170H41
Through hardening boron steel (section three)
BS 970 (Part 1) 170H36
Through hardening steel for mechanical and allied engineering purposes (Table 6 gives composition only; see the hardenability tables).
Key Differences
Can BS 970 (Part 1) 170H41 Be Substituted With BS 970 (Part 1) 170H36?
BS 970 (Part 1) 170H41 and BS 970 (Part 1) 170H36 overlap closely enough on chemistry and mechanical properties that BS 970 (Part 1) 170H36 is often considered as a substitute for BS 970 (Part 1) 170H41 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.
On M-EX Right Now
BS 970 (Part 1) 170H41
0 active listings and RFQs →
BS 970 (Part 1) 170H36
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between BS 970 (Part 1) 170H41 and BS 970 (Part 1) 170H36?
BS 970 (Part 1) 170H36 specifies P, S which are not specified for BS 970 (Part 1) 170H41.
Can BS 970 (Part 1) 170H41 be substituted with BS 970 (Part 1) 170H36?
BS 970 (Part 1) 170H41 and BS 970 (Part 1) 170H36 overlap closely enough on chemistry and mechanical properties that BS 970 (Part 1) 170H36 is often considered as a substitute for BS 970 (Part 1) 170H41 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.