Strong Match — 96% match
based on chemical composition and mechanical property overlap.
BS 970 (Part 1) 430S17 (BS 970 (Part 1):1991) and BS 970 EN60 (BS 970:1955) are both steel grades.
Both fall under the Stainless Steel category.
BS 970 (Part 1) 430S17 is typically used for ferritic and martensitic stainless and heat resisting steel (section five), while BS 970 EN60 is commonly used for bars and billets for forging; forgings and drop-forgings; bars for machining; bright bars..
BS 970 (Part 1) 430S17 is defined under British Standards (BS), originating from United Kingdom, while BS 970 EN60 is defined under British Standards (BS), originating from United Kingdom.
As per chemical composition, BS 970 (Part 1) 430S17 vs BS 970 EN60 is a 96% match.
Mechanical property data is not available for both grades, so this factor could not be scored.
Combined, this makes them a strong match overall at 96%.
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Typical Applications
BS 970 (Part 1) 430S17
Ferritic and martensitic stainless and heat resisting steel (section five)
BS 970 EN60
Bars and billets for forging; forgings and drop-forgings; bars for machining; bright bars.
Can BS 970 (Part 1) 430S17 Be Substituted With BS 970 EN60?
BS 970 (Part 1) 430S17 and BS 970 EN60 overlap closely enough on chemistry and mechanical properties that BS 970 EN60 is often considered as a substitute for BS 970 (Part 1) 430S17 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.
What is the difference between BS 970 (Part 1) 430S17 and BS 970 EN60?
Both grades share a similar composition profile; see the specification table above for the exact chemistry and mechanical property values.
Can BS 970 (Part 1) 430S17 be substituted with BS 970 EN60?
BS 970 (Part 1) 430S17 and BS 970 EN60 overlap closely enough on chemistry and mechanical properties that BS 970 EN60 is often considered as a substitute for BS 970 (Part 1) 430S17 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.