Post Stock Login Register

BS 970 (Part 1) 835M15 vs BS 970 (Part 1) 822H17

Related Material — 69.9% match based on chemical composition and mechanical property overlap.

BS 970 (Part 1) 835M15 (BS 970 (Part 1):1991) and BS 970 (Part 1) 822H17 (BS 970 (Part 1):1991) are both steel grades. Both fall under the Alloy Steel category. BS 970 (Part 1) 835M15 is typically used for case hardening steel (section four), while BS 970 (Part 1) 822H17 is commonly used for case hardening steel (section four). BS 970 (Part 1) 835M15 is defined under British Standards (BS), originating from United Kingdom, while BS 970 (Part 1) 822H17 is defined under British Standards (BS), originating from United Kingdom.

As per chemical composition, BS 970 (Part 1) 835M15 vs BS 970 (Part 1) 822H17 is a 72.5% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a related material overall at 69.9%.

Frequently Compared With BS 970 (Part 1) 835M15:
IS 1570 (Part 4) 103Cr6 IS 1570 (Part 4) 105Cr5 IS 1570 (Part 4) 10Cr20Mo6 IS 4367 07Cr4Mo6 IS 1570 (Part 4) 07Cr4Mo6 NF A35-565 100C6 UNI 11234 100Cr6 IS 1570 (Part 4) 103Cr4 IS 1570 (Part 7) 10Cr36Mo10H IS 4367 10Cr9Mo10 IS 1570 (Part 4) 10Mo6 IS 1570 (Part 7) 10Mo6H
Match Breakdown
CHEMISTRY MATCH
72.5%
MECHANICAL MATCH
No shared data
OVERALL
69.9%
Specifications
Property BS 970 (Part 1) 835M15 BS 970 (Part 1) 822H17
Standard BS 970 (Part 1):1991 BS 970 (Part 1):1991
Category Alloy Steel Alloy Steel
C (%) 0.12-0.18 0.14-0.20
Mn (%) 0.25-0.50 0.40-0.70
Cr (%) 1.00-1.40 1.30-1.70
Mo (%) 0.15-0.30 0.15-0.25
Ni (%) 3.90-4.30 1.75-2.25
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property BS 970 (Part 1) 835M15 BS 970 (Part 1) 822H17
Condition Case hardened, 19 mm test bar Not specified
Tensile Strength 1310 MPa min Not specified
Elongation 8 % min Not specified
Typical Applications
BS 970 (Part 1) 835M15
Case hardening steel (section four)
BS 970 (Part 1) 822H17
Case hardening steel (section four)
Can BS 970 (Part 1) 835M15 Be Substituted With BS 970 (Part 1) 822H17?
BS 970 (Part 1) 835M15 and BS 970 (Part 1) 822H17 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
On M-EX Right Now
BS 970 (Part 1) 835M15
0 active listings and RFQs →
BS 970 (Part 1) 822H17
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between BS 970 (Part 1) 835M15 and BS 970 (Part 1) 822H17?
Both grades share a similar composition profile; see the specification table above for the exact chemistry and mechanical property values.
Can BS 970 (Part 1) 835M15 be substituted with BS 970 (Part 1) 822H17?
BS 970 (Part 1) 835M15 and BS 970 (Part 1) 822H17 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.