Post Stock Login Register

BS 970 EN10 vs BS 970 EN12C

Close Alternative — 80.1% match based on chemical composition and mechanical property overlap.

BS 970 EN10 (BS 970:1955) and BS 970 EN12C (BS 970:1955) are both steel grades. Both fall under the Alloy Steel category. BS 970 EN10 is defined under British Standards (BS), originating from United Kingdom, while BS 970 EN12C is defined under British Standards (BS), originating from United Kingdom.

As per chemical composition, BS 970 EN10 vs BS 970 EN12C is a 80.1% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a close alternative overall at 80.1%.

Frequently Compared With BS 970 EN10:
IS 1570 (Part 4) 105Cr5 IS 4367 10Cr9Mo10 IS 4367 07Cr4Mo6 IS 1570 (Part 4) 07Cr4Mo6 IS 1570 (Part 4) 103Cr4 IS 1570 (Part 4) 10Cr20Mo6 IS 1570 (Part 4) 10Mo6 IS 1570 (Part 7) 10Mo6H NF A35-565 100C6 UNI 11234 100Cr6 IS 1570 (Part 4) 103Cr6 IS 1570 (Part 7) 10Cr36Mo10H
Match Breakdown
CHEMISTRY MATCH
80.1%
MECHANICAL MATCH
No shared data
OVERALL
80.1%
Specifications
Property BS 970 EN10 BS 970 EN12C
Standard BS 970:1955 BS 970:1955
Category Alloy Steel Alloy Steel
C (%) 0.50-0.60 0.40-0.45
Si (%) 0.05-0.35 0.10-0.35
Mn (%) 0.50-0.80 0.70-0.90
Ni (%) 0.50-0.80 0.60-1.00
S (%) <=0.060 <=0.050
P (%) <=0.060 <=0.050
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property BS 970 EN10 BS 970 EN12C
Tensile Strength Not specified ≥541 MPa (35 tons/sq in, converted)
Yield Strength Not specified ≥309 MPa (20 tons/sq in, converted)
Elongation Not specified ≥20%
Hardness Not specified 152-207 HB
Condition Not specified Normalised, ruling section 6 in (lowest-strength condition of the standard)
Typical Applications
BS 970 EN10
Bars and billets for forging; forgings and drop-forgings; bars for machining; bright bars. Used to a limited extent for special applications; supplied to a specified composition.
BS 970 EN12C
Not documented
Can BS 970 EN10 Be Substituted With BS 970 EN12C?
BS 970 EN10 and BS 970 EN12C are a close alternative rather than a direct substitute. Some properties overlap well, but check the specific chemistry and mechanical rows above against your application's requirements before treating them as interchangeable.
On M-EX Right Now
BS 970 EN10
0 active listings and RFQs →
BS 970 EN12C
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between BS 970 EN10 and BS 970 EN12C?
Both grades share a similar composition profile; see the specification table above for the exact chemistry and mechanical property values.
Can BS 970 EN10 be substituted with BS 970 EN12C?
BS 970 EN10 and BS 970 EN12C are a close alternative rather than a direct substitute. Some properties overlap well, but check the specific chemistry and mechanical rows above against your application's requirements before treating them as interchangeable.