Post Stock Login Register

BS 970 EN111A vs IS 11169 (Part 1) 35Ni5Cr2

Strong Match — 95.7% match based on chemical composition and mechanical property overlap.

BS 970 EN111A (BS 970:1955) and IS 11169 (Part 1) 35Ni5Cr2 (IS 11169 (Part 1):1984) are both steel grades. Both fall under the Alloy Steel category. BS 970 EN111A is defined under British Standards (BS), originating from United Kingdom, while IS 11169 (Part 1) 35Ni5Cr2 is defined under Bureau of Indian Standards (IS), originating from India.

As per chemical composition, BS 970 EN111A vs IS 11169 (Part 1) 35Ni5Cr2 is a 95.7% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a strong match overall at 95.7%.

Frequently Compared With BS 970 EN111A:
IS 11169 (Part 1) 10Ni5Cr4 IS 1570 (Part 4) 103Cr4 IS 1570 (Part 4) 10Cr20Mo6 IS 4367 07Cr4Mo6 IS 1570 (Part 4) 07Cr4Mo6 NF A35-565 100C6 UNI 11234 100Cr6 IS 1570 (Part 4) 103Cr6 IS 1570 (Part 4) 105Cr5 IS 1570 (Part 7) 10Cr36Mo10H IS 4367 10Cr9Mo10 IS 1570 (Part 4) 10Mo6
Match Breakdown
CHEMISTRY MATCH
95.7%
MECHANICAL MATCH
No shared data
OVERALL
95.7%
Specifications
Property BS 970 EN111A IS 11169 (Part 1) 35Ni5Cr2
Standard BS 970:1955 IS 11169 (Part 1):1984
Category Alloy Steel Alloy Steel
C (%) 0.33-0.38 0.30-0.40
Si (%) 0.10-0.35 0.10-0.35
Mn (%) 0.60-0.90 0.60-0.90
Ni (%) 1.00-1.50 1.00-1.50
Cr (%) 0.45-0.75 0.45-0.75
S (%) <=0.050 Not specified
P (%) <=0.050 Not specified
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property BS 970 EN111A IS 11169 (Part 1) 35Ni5Cr2
Hardness, annealed Not specified <=190 HB
Typical Applications
BS 970 EN111A
Not documented
IS 11169 (Part 1) 35Ni5Cr2
Cold heading and cold extrusion; the standard covers wires, wire rods and bars of 2 to 100 mm diameter (clause 1.1)
Key Differences
Can BS 970 EN111A Be Substituted With IS 11169 (Part 1) 35Ni5Cr2?
BS 970 EN111A and IS 11169 (Part 1) 35Ni5Cr2 overlap closely enough on chemistry and mechanical properties that IS 11169 (Part 1) 35Ni5Cr2 is often considered as a substitute for BS 970 EN111A in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.
On M-EX Right Now
BS 970 EN111A
0 active listings and RFQs →
IS 11169 (Part 1) 35Ni5Cr2
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between BS 970 EN111A and IS 11169 (Part 1) 35Ni5Cr2?
BS 970 EN111A specifies S, P which are not specified for IS 11169 (Part 1) 35Ni5Cr2.
Can BS 970 EN111A be substituted with IS 11169 (Part 1) 35Ni5Cr2?
BS 970 EN111A and IS 11169 (Part 1) 35Ni5Cr2 overlap closely enough on chemistry and mechanical properties that IS 11169 (Part 1) 35Ni5Cr2 is often considered as a substitute for BS 970 EN111A in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.