Post Stock Login Register

BS 970 EN12B vs NF A35-565 100C6

Minimal Match — 35% match based on chemical composition and mechanical property overlap.

BS 970 EN12B (BS 970:1955) and NF A35-565 100C6 are both steel grades. Both fall under the Alloy Steel category. BS 970 EN12B is defined under British Standards (BS), originating from United Kingdom, while NF A35-565 100C6 is defined under Association Francaise de Normalisation (NF), originating from France.

As per chemical composition, BS 970 EN12B vs NF A35-565 100C6 is a 64.7% match. As per mechanical properties, the match is 0%. Combined, this makes them a minimal match overall at 35%.

Frequently Compared With BS 970 EN12B:
IS 4367 07Cr4Mo6 IS 1570 (Part 4) 07Cr4Mo6 UNI 11234 100Cr6 IS 1570 (Part 4) 103Cr4 IS 1570 (Part 4) 103Cr6 IS 1570 (Part 4) 105Cr5 IS 1570 (Part 4) 10Cr20Mo6 IS 1570 (Part 7) 10Cr36Mo10H IS 4367 10Cr9Mo10 IS 1570 (Part 4) 10Mo6 IS 1570 (Part 7) 10Mo6H IS 11169 (Part 1) 10Ni5Cr4
Match Breakdown
CHEMISTRY MATCH
64.7%
MECHANICAL MATCH
0%
OVERALL
35%
Specifications
Property BS 970 EN12B NF A35-565 100C6
Standard BS 970:1955 NF A35-565
Category Alloy Steel Alloy Steel
C (%) 0.35-0.40 0.95-1.05
Si (%) 0.10-0.35 0.15-0.35
Mn (%) 0.70-0.90 0.25-0.45
Ni (%) 0.60-1.00 Not specified
S (%) <=0.050 <=0.025
P (%) <=0.050 <=0.027
Cr (%) Not specified 1.35-1.65
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property BS 970 EN12B NF A35-565 100C6
Tensile Strength ≥541 MPa (35 tons/sq in, converted) 850-1100 MPa
Yield Strength ≥309 MPa (20 tons/sq in, converted) Not specified
Elongation ≥20% Not specified
Hardness 152-207 HB 60-66 HRC
Condition Normalised, ruling section 6 in (lowest-strength condition of the standard) Not specified
Typical Applications
BS 970 EN12B
Not documented
NF A35-565 100C6
ball bearings, roller bearings, bearing races, rollers, precision tools, wear resistant parts
Key Differences
Can BS 970 EN12B Be Substituted With NF A35-565 100C6?
BS 970 EN12B and NF A35-565 100C6 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
Forms & Sizes Available on M-EX
BS 970 EN12B
No active listings currently.
NF A35-565 100C6
Round Bar → (2 listings)
Diameter: 50–50 mm (1.97–1.97 in)
Length: 6700–6700 mm (263.78–263.78 in)
On M-EX Right Now
BS 970 EN12B
0 active listings and RFQs →
NF A35-565 100C6
2 active listings and RFQs →
Frequently Asked Questions
What is the difference between BS 970 EN12B and NF A35-565 100C6?
BS 970 EN12B specifies Ni which is not specified for NF A35-565 100C6. NF A35-565 100C6 specifies Cr which is not specified for BS 970 EN12B.
Can BS 970 EN12B be substituted with NF A35-565 100C6?
BS 970 EN12B and NF A35-565 100C6 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.