Related Material — 69.9% match
based on chemical composition and mechanical property overlap.
BS 970 EN160A (BS 970:1955) and SAE J404 4620 (SAE J404:2009) are both steel grades.
Both fall under the Alloy Steel category.
BS 970 EN160A is defined under British Standards (BS), originating from United Kingdom, while SAE J404 4620 is defined under SAE International, originating from United States.
As per chemical composition, BS 970 EN160A vs SAE J404 4620 is a 79.9% match.
Mechanical property data is not available for both grades, so this factor could not be scored.
Combined, this makes them a related material overall at 69.9%.
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Typical Applications
BS 970 EN160A
Not documented
SAE J404 4620
Used for gears, bearings, shafts, transmission parts, pinions, and heavy-duty carburized components.
Can BS 970 EN160A Be Substituted With SAE J404 4620?
BS 970 EN160A and SAE J404 4620 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
What is the difference between BS 970 EN160A and SAE J404 4620?
Both grades share a similar composition profile; see the specification table above for the exact chemistry and mechanical property values.
Can BS 970 EN160A be substituted with SAE J404 4620?
BS 970 EN160A and SAE J404 4620 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.