Post Stock Login Register

BS 970 EN16B vs BS 970 (Part 1) 605H32

Strong Match — 87.5% match based on chemical composition and mechanical property overlap.

BS 970 EN16B (BS 970:1955) and BS 970 (Part 1) 605H32 (BS 970 (Part 1):1983) are both steel grades. Both fall under the Alloy Steel category. BS 970 EN16B is defined under British Standards (BS), originating from United Kingdom, while BS 970 (Part 1) 605H32 is defined under British Standards (BS), originating from United Kingdom.

As per chemical composition, BS 970 EN16B vs BS 970 (Part 1) 605H32 is a 87.5% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a strong match overall at 87.5%.

Frequently Compared With BS 970 EN16B:
IS 4367 07Cr4Mo6 NF A35-565 100C6 IS 1570 (Part 4) 10Cr20Mo6 IS 4367 10Cr9Mo10 IS 1570 (Part 4) 07Cr4Mo6 UNI 11234 100Cr6 IS 1570 (Part 4) 103Cr4 IS 1570 (Part 4) 103Cr6 IS 1570 (Part 4) 105Cr5 IS 1570 (Part 7) 10Cr36Mo10H IS 1570 (Part 4) 10Mo6 IS 1570 (Part 7) 10Mo6H
Match Breakdown
CHEMISTRY MATCH
87.5%
MECHANICAL MATCH
No shared data
OVERALL
87.5%
Specifications
Property BS 970 EN16B BS 970 (Part 1) 605H32
Standard BS 970:1955 BS 970 (Part 1):1983
Category Alloy Steel Alloy Steel
C (%) 0.30-0.35 0.29-0.35
Si (%) 0.10-0.35 Not specified
Mn (%) 1.30-1.80 1.25-1.75
Mo (%) 0.20-0.35 0.22-0.32
S (%) <=0.050 <=0.040
P (%) <=0.050 <=0.035
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property BS 970 EN16B BS 970 (Part 1) 605H32
Tensile Strength ≥695 MPa (45 tons/sq in, converted) Not specified
Yield Strength ≥525 MPa (34 tons/sq in, converted) Not specified
Elongation ≥22% Not specified
Hardness 201-255 HB Not specified
Condition Hardened and tempered R, ruling section 6 in (lowest-strength condition of the standard) Not specified
Typical Applications
BS 970 EN16B
Not documented
BS 970 (Part 1) 605H32
Through hardening steel for mechanical and allied engineering purposes; supplied in the hardened and tempered conditions of Table 6.
Key Differences
Can BS 970 EN16B Be Substituted With BS 970 (Part 1) 605H32?
BS 970 EN16B and BS 970 (Part 1) 605H32 overlap closely enough on chemistry and mechanical properties that BS 970 (Part 1) 605H32 is often considered as a substitute for BS 970 EN16B in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.
On M-EX Right Now
BS 970 EN16B
0 active listings and RFQs →
BS 970 (Part 1) 605H32
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between BS 970 EN16B and BS 970 (Part 1) 605H32?
BS 970 EN16B specifies Si which is not specified for BS 970 (Part 1) 605H32.
Can BS 970 EN16B be substituted with BS 970 (Part 1) 605H32?
BS 970 EN16B and BS 970 (Part 1) 605H32 overlap closely enough on chemistry and mechanical properties that BS 970 (Part 1) 605H32 is often considered as a substitute for BS 970 EN16B in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.