Post Stock Login Register

BS 970 EN18B vs SAE J404 5132

Strong Match — 90.4% match based on chemical composition and mechanical property overlap.

BS 970 EN18B (BS 970:1955) and SAE J404 5132 (SAE J404:2000) are both steel grades. Both fall under the Alloy Steel category. BS 970 EN18B is defined under British Standards (BS), originating from United Kingdom, while SAE J404 5132 is defined under SAE International, originating from United States.

As per chemical composition, BS 970 EN18B vs SAE J404 5132 is a 90.4% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a strong match overall at 90.4%.

Frequently Compared With BS 970 EN18B:
IS 11169 (Part 1) 10Ni5Cr4 IS 4367 07Cr4Mo6 IS 1570 (Part 4) 07Cr4Mo6 IS 1570 (Part 4) 105Cr5 IS 1570 (Part 7) 10Cr36Mo10H IS 4367 10Cr9Mo10 IS 1570 (Part 4) 10Mo6 NF A35-565 100C6 UNI 11234 100Cr6 IS 1570 (Part 4) 103Cr4 IS 1570 (Part 4) 103Cr6 IS 1570 (Part 4) 10Cr20Mo6
Match Breakdown
CHEMISTRY MATCH
90.4%
MECHANICAL MATCH
No shared data
OVERALL
90.4%
Specifications
Property BS 970 EN18B SAE J404 5132
Standard BS 970:1955 SAE J404:2000
Category Alloy Steel Alloy Steel
C (%) 0.30-0.35 0.30-0.35
Si (%) 0.10-0.35 0.15-0.35
Mn (%) 0.65-0.80 0.60-0.80
Cr (%) 0.85-1.15 0.75-1.00
S (%) <=0.050 <=0.040
P (%) <=0.050 <=0.030
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property BS 970 EN18B SAE J404 5132
Tensile Strength ≥695 MPa (45 tons/sq in, converted) Not specified
Yield Strength ≥525 MPa (34 tons/sq in, converted) Not specified
Elongation ≥22% Not specified
Hardness 201-255 HB Not specified
Condition Hardened and tempered R, ruling section 4 in (lowest-strength condition of the standard) Not specified
Typical Applications
BS 970 EN18B
Not documented
SAE J404 5132
Chemistry-only alloy steel grade; see the composition notes for product scope
Can BS 970 EN18B Be Substituted With SAE J404 5132?
BS 970 EN18B and SAE J404 5132 overlap closely enough on chemistry and mechanical properties that SAE J404 5132 is often considered as a substitute for BS 970 EN18B in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.
On M-EX Right Now
BS 970 EN18B
0 active listings and RFQs →
SAE J404 5132
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between BS 970 EN18B and SAE J404 5132?
Both grades share a similar composition profile; see the specification table above for the exact chemistry and mechanical property values.
Can BS 970 EN18B be substituted with SAE J404 5132?
BS 970 EN18B and SAE J404 5132 overlap closely enough on chemistry and mechanical properties that SAE J404 5132 is often considered as a substitute for BS 970 EN18B in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.