Post Stock Login Register

BS 970 EN1A Leaded vs BS 970 (Part 1) 220M07

Strong Match — 88.4% match based on chemical composition and mechanical property overlap.

BS 970 EN1A Leaded (BS 970:1955) and BS 970 (Part 1) 220M07 (BS 970 (Part 1):1983) are both steel grades. Both fall under the Free Machining Steel category. BS 970 EN1A Leaded is typically used for high speed automatic machining, precision parts, while BS 970 (Part 1) 220M07 is commonly used for wrought steel for mechanical and allied engineering purposes; free cutting grade in the as rolled condition (table 2).. BS 970 EN1A Leaded is defined under British Standards (BS), originating from United Kingdom, while BS 970 (Part 1) 220M07 is defined under British Standards (BS), originating from United Kingdom.

As per chemical composition, BS 970 EN1A Leaded vs BS 970 (Part 1) 220M07 is a 88.4% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a strong match overall at 88.4%.

Frequently Compared With BS 970 EN1A Leaded:
SAE J403 1117 SAE J403 1117 SAE J403 1118 SAE J403 1126 SAE J403 1117 SAE J403 1118 SAE J403 1126 IS 1570 (Part 3) 10C8S10 IS 4432 10C8S10 SAE J403 1126 SAE J403 1118 SAE J403 1132
Match Breakdown
CHEMISTRY MATCH
88.4%
MECHANICAL MATCH
No shared data
OVERALL
88.4%
Specifications
Property BS 970 EN1A Leaded BS 970 (Part 1) 220M07
Standard BS 970:1955 BS 970 (Part 1):1983
Category Free Machining Steel Free Machining Steel
C (%) 0.07–0.15 <=0.15
Mn (%) 0.80–1.20 0.90-1.30
S (%) 0.20–0.30 0.20-0.30
Pb (%) 0.15–0.35 Not specified
P (%) Not specified <=0.070
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property BS 970 EN1A Leaded BS 970 (Part 1) 220M07
Tensile Strength 380–490 MPa Not specified
Elongation ≥20% Not specified
Hardness ≤152 HB Not specified
Typical Applications
BS 970 EN1A Leaded
High speed automatic machining, precision parts
BS 970 (Part 1) 220M07
Wrought steel for mechanical and allied engineering purposes; free cutting grade in the as rolled condition (Table 2).
Key Differences
Can BS 970 EN1A Leaded Be Substituted With BS 970 (Part 1) 220M07?
BS 970 EN1A Leaded and BS 970 (Part 1) 220M07 overlap closely enough on chemistry and mechanical properties that BS 970 (Part 1) 220M07 is often considered as a substitute for BS 970 EN1A Leaded in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.
Forms & Sizes Available on M-EX
BS 970 EN1A Leaded
Round Bar → (3 listings)
Diameter: 30–30 mm (1.18–1.18 in)
Length: 2700–3800 mm (106.3–149.61 in)
BS 970 (Part 1) 220M07
No active listings currently.
On M-EX Right Now
BS 970 EN1A Leaded
3 active listings and RFQs →
BS 970 (Part 1) 220M07
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between BS 970 EN1A Leaded and BS 970 (Part 1) 220M07?
BS 970 EN1A Leaded specifies Pb which is not specified for BS 970 (Part 1) 220M07. BS 970 (Part 1) 220M07 specifies P which is not specified for BS 970 EN1A Leaded.
Can BS 970 EN1A Leaded be substituted with BS 970 (Part 1) 220M07?
BS 970 EN1A Leaded and BS 970 (Part 1) 220M07 overlap closely enough on chemistry and mechanical properties that BS 970 (Part 1) 220M07 is often considered as a substitute for BS 970 EN1A Leaded in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.