Post Stock Login Register

BS 970 EN21A vs BS 970 EN12C

Related Material — 69.9% match based on chemical composition and mechanical property overlap.

BS 970 EN21A (BS 970:1955) and BS 970 EN12C (BS 970:1955) are both steel grades. Both fall under the Alloy Steel category. BS 970 EN21A is defined under British Standards (BS), originating from United Kingdom, while BS 970 EN12C is defined under British Standards (BS), originating from United Kingdom.

As per chemical composition, BS 970 EN21A vs BS 970 EN12C is a 77.1% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a related material overall at 69.9%.

Frequently Compared With BS 970 EN21A:
IS 4367 07Cr4Mo6 IS 1570 (Part 4) 07Cr4Mo6 NF A35-565 100C6 IS 1570 (Part 4) 103Cr4 IS 1570 (Part 4) 103Cr6 IS 1570 (Part 4) 105Cr5 IS 1570 (Part 4) 10Cr20Mo6 IS 4367 10Cr9Mo10 UNI 11234 100Cr6 IS 1570 (Part 7) 10Cr36Mo10H IS 1570 (Part 4) 10Mo6 IS 1570 (Part 7) 10Mo6H
Match Breakdown
CHEMISTRY MATCH
77.1%
MECHANICAL MATCH
No shared data
OVERALL
69.9%
Specifications
Property BS 970 EN21A BS 970 EN12C
Standard BS 970:1955 BS 970:1955
Category Alloy Steel Alloy Steel
C (%) 0.20-0.30 0.40-0.45
Si (%) 0.10-0.35 0.10-0.35
Mn (%) <=0.60 0.70-0.90
Ni (%) 2.50-3.50 0.60-1.00
S (%) <=0.050 <=0.050
P (%) <=0.050 <=0.050
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property BS 970 EN21A BS 970 EN12C
Tensile Strength Not specified ≥541 MPa (35 tons/sq in, converted)
Yield Strength Not specified ≥309 MPa (20 tons/sq in, converted)
Elongation Not specified ≥20%
Hardness Not specified 152-207 HB
Condition Not specified Normalised, ruling section 6 in (lowest-strength condition of the standard)
Can BS 970 EN21A Be Substituted With BS 970 EN12C?
BS 970 EN21A and BS 970 EN12C share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
On M-EX Right Now
BS 970 EN21A
0 active listings and RFQs →
BS 970 EN12C
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between BS 970 EN21A and BS 970 EN12C?
Both grades share a similar composition profile; see the specification table above for the exact chemistry and mechanical property values.
Can BS 970 EN21A be substituted with BS 970 EN12C?
BS 970 EN21A and BS 970 EN12C share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.