Post Stock Login Register

BS 970 EN2A/1 vs BS 970 (Part 1) 055M15

Strong Match — 92.4% match based on chemical composition and mechanical property overlap.

BS 970 EN2A/1 (BS 970:1955) and BS 970 (Part 1) 055M15 (BS 970 (Part 1):1991) are both steel grades. Both fall under the Carbon Steel category. BS 970 EN2A/1 is typically used for bars and billets for forging; forgings and drop-forgings; bars for machining, while BS 970 (Part 1) 055M15 is commonly used for as-rolled, or as-rolled and softened, steel (section two). BS 970 EN2A/1 is defined under British Standards (BS), originating from United Kingdom, while BS 970 (Part 1) 055M15 is defined under British Standards (BS), originating from United Kingdom.

As per chemical composition, BS 970 EN2A/1 vs BS 970 (Part 1) 055M15 is a 92.4% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a strong match overall at 92.4%.

Frequently Compared With BS 970 EN2A/1:
BS 970 (Part 1) 040A04 BS 970 (Part 1) 040A10 BS 970 (Part 1) 060A32 BS 970 (Part 1) 045A10 BS 970 (Part 1) 045M10 BS 970 (Part 3) 045M10 BS 970 (Part 1) 040A12 BS 970 (Part 1) 045A10 BS 970 (Part 3) 045A10 BS 970 (Part 1) 060A40 BS 970 (Part 1) 060A45 BS 970 (Part 1) 045M10
Match Breakdown
CHEMISTRY MATCH
92.4%
MECHANICAL MATCH
No shared data
OVERALL
92.4%
Specifications
Property BS 970 EN2A/1 BS 970 (Part 1) 055M15
Standard BS 970:1955 BS 970 (Part 1):1991
Category Carbon Steel Carbon Steel
C (%) <=0.10 <=0.20
Mn (%) <=0.50 <=0.80
S (%) <=0.040 Not specified
P (%) <=0.040 Not specified
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property BS 970 EN2A/1 BS 970 (Part 1) 055M15
Condition Not specified As-rolled
Tensile Strength Not specified 310 MPa min
Elongation Not specified 25 % min
Hardness Not specified 121 HB min
Typical Applications
BS 970 EN2A/1
Bars and billets for forging; forgings and drop-forgings; bars for machining
BS 970 (Part 1) 055M15
As-rolled, or as-rolled and softened, steel (section two)
Key Differences
Can BS 970 EN2A/1 Be Substituted With BS 970 (Part 1) 055M15?
BS 970 EN2A/1 and BS 970 (Part 1) 055M15 overlap closely enough on chemistry and mechanical properties that BS 970 (Part 1) 055M15 is often considered as a substitute for BS 970 EN2A/1 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.
On M-EX Right Now
BS 970 EN2A/1
0 active listings and RFQs →
BS 970 (Part 1) 055M15
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between BS 970 EN2A/1 and BS 970 (Part 1) 055M15?
BS 970 EN2A/1 specifies S, P which are not specified for BS 970 (Part 1) 055M15.
Can BS 970 EN2A/1 be substituted with BS 970 (Part 1) 055M15?
BS 970 EN2A/1 and BS 970 (Part 1) 055M15 overlap closely enough on chemistry and mechanical properties that BS 970 (Part 1) 055M15 is often considered as a substitute for BS 970 EN2A/1 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.