Post Stock Login Register

BS 970 EN2B vs BS 970 (Part 3) 045A10

Close Alternative — 84.8% match based on chemical composition and mechanical property overlap.

BS 970 EN2B (BS 970:1955) and BS 970 (Part 3) 045A10 (BS 970 (Part 3):1991) are both steel grades. Both fall under the Carbon Steel category. BS 970 EN2B is typically used for bars and billets for forging; forgings and drop-forgings; bars for machining, while BS 970 (Part 3) 045A10 is commonly used for bright cold finished bars (cold drawn, turned or precision ground) for general engineering purposes, in straight lengths; case hardening steel, carbon and carbon manganese (table 14). BS 970 EN2B is defined under British Standards (BS), originating from United Kingdom, while BS 970 (Part 3) 045A10 is defined under British Standards (BS), originating from United Kingdom.

As per chemical composition, BS 970 EN2B vs BS 970 (Part 3) 045A10 is a 84.8% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a close alternative overall at 84.8%.

Frequently Compared With BS 970 EN2B:
BS 970 (Part 1) 045A10 BS 970 (Part 1) 045M10 BS 970 (Part 1) 055M15 BS 970 (Part 1) 040A04 BS 970 (Part 1) 040A12 BS 970 (Part 3) 045M10 BS 970 (Part 1) 060A32 BS 970 (Part 1) 060A45 BS 970 (Part 1) 040A10 BS 970 (Part 1) 045A10 BS 970 (Part 1) 045M10 BS 970 (Part 1) 060A40
Match Breakdown
CHEMISTRY MATCH
84.8%
MECHANICAL MATCH
No shared data
OVERALL
84.8%
Specifications
Property BS 970 EN2B BS 970 (Part 3) 045A10
Standard BS 970:1955 BS 970 (Part 3):1991
Category Carbon Steel Carbon Steel
C (%) <=0.15 0.08-0.13
Mn (%) <=0.50 0.30-0.60
S (%) <=0.050 <=0.05
P (%) <=0.050 <=0.05
Si (%) Not specified 0.10-0.40
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Typical Applications
BS 970 EN2B
Bars and billets for forging; forgings and drop-forgings; bars for machining
BS 970 (Part 3) 045A10
Bright cold finished bars (cold drawn, turned or precision ground) for general engineering purposes, in straight lengths; case hardening steel, carbon and carbon manganese (Table 14)
Key Differences
Can BS 970 EN2B Be Substituted With BS 970 (Part 3) 045A10?
BS 970 EN2B and BS 970 (Part 3) 045A10 are a close alternative rather than a direct substitute. Some properties overlap well, but check the specific chemistry and mechanical rows above against your application's requirements before treating them as interchangeable.
On M-EX Right Now
BS 970 EN2B
0 active listings and RFQs →
BS 970 (Part 3) 045A10
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between BS 970 EN2B and BS 970 (Part 3) 045A10?
BS 970 (Part 3) 045A10 specifies Si which is not specified for BS 970 EN2B.
Can BS 970 EN2B be substituted with BS 970 (Part 3) 045A10?
BS 970 EN2B and BS 970 (Part 3) 045A10 are a close alternative rather than a direct substitute. Some properties overlap well, but check the specific chemistry and mechanical rows above against your application's requirements before treating them as interchangeable.