Close Alternative — 74% match
based on chemical composition and mechanical property overlap.
BS 970 EN325 (BS 970:1955) and BS 970 EN362 (BS 970:1955) are both steel grades.
Both fall under the Alloy Steel category.
BS 970 EN325 is defined under British Standards (BS), originating from United Kingdom, while BS 970 EN362 is defined under British Standards (BS), originating from United Kingdom.
As per chemical composition, BS 970 EN325 vs BS 970 EN362 is a 60.9% match.
As per mechanical properties, the match is 100%.
Combined, this makes them a close alternative overall at 74%.
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property
BS 970 EN325
BS 970 EN362
Tensile Strength
≥849 MPa (55 tons/sq in, converted)
≥849 MPa (55 tons/sq in, converted)
Elongation
≥15%
≥15%
Condition
core, min (lowest-strength condition of the standard)
core, min (lowest-strength condition of the standard)
Typical Applications
BS 970 EN325
Not documented
BS 970 EN362
Case hardened gears, cams, shafts
Can BS 970 EN325 Be Substituted With BS 970 EN362?
BS 970 EN325 and BS 970 EN362 are a close alternative rather than a direct substitute. Some properties overlap well, but check the specific chemistry and mechanical rows above against your application's requirements before treating them as interchangeable.
What is the difference between BS 970 EN325 and BS 970 EN362?
Both grades share a similar composition profile; see the specification table above for the exact chemistry and mechanical property values.
Can BS 970 EN325 be substituted with BS 970 EN362?
BS 970 EN325 and BS 970 EN362 are a close alternative rather than a direct substitute. Some properties overlap well, but check the specific chemistry and mechanical rows above against your application's requirements before treating them as interchangeable.