Post Stock Login Register

BS 970 EN32C vs EN 10084 C16E

Strong Match — 93.3% match based on chemical composition and mechanical property overlap.

BS 970 EN32C (BS 970:1955) and EN 10084 C16E (EN 10084:2008) are both steel grades. Both fall under the Carbon Steel category. BS 970 EN32C is defined under British Standards (BS), originating from United Kingdom, while EN 10084 C16E is defined under European Standard (EN), originating from Europe.

As per chemical composition, BS 970 EN32C vs EN 10084 C16E is a 93.3% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a strong match overall at 93.3%.

Frequently Compared With BS 970 EN32C:
BS 970 (Part 1) 045A10 BS 970 (Part 3) 045M10 BS 970 (Part 1) 060A40 BS 970 (Part 1) 040A04 BS 970 (Part 1) 040A12 BS 970 (Part 1) 045M10 BS 970 (Part 1) 055M15 BS 970 (Part 1) 060A32 BS 970 (Part 3) 080A15 BS 970 (Part 1) 040A10 BS 970 (Part 1) 045A10 BS 970 (Part 3) 045A10
Match Breakdown
CHEMISTRY MATCH
93.3%
MECHANICAL MATCH
No shared data
OVERALL
93.3%
Specifications
Property BS 970 EN32C EN 10084 C16E
Standard BS 970:1955 EN 10084:2008
Category Carbon Steel Carbon Steel
C (%) 0.10-0.18 0.12-0.18
Si (%) 0.05-0.35 <=0.40
Mn (%) 0.60-1.00 0.60-0.90
S (%) <=0.050 <=0.035
P (%) <=0.050 <=0.035
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property BS 970 EN32C EN 10084 C16E
Tensile Strength ≥494 MPa (32 tons/sq in, converted) Not specified
Elongation ≥20% Not specified
Condition Core, after heat treatment (lowest-strength condition of the standard) Soft annealed
Hardness Not specified Soft annealed: 156 HB max
Typical Applications
BS 970 EN32C
Not documented
EN 10084 C16E
Case hardened machine parts: carburized or carbonitrided, then hardened (clause 3.1)
Can BS 970 EN32C Be Substituted With EN 10084 C16E?
BS 970 EN32C and EN 10084 C16E overlap closely enough on chemistry and mechanical properties that EN 10084 C16E is often considered as a substitute for BS 970 EN32C in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.
On M-EX Right Now
BS 970 EN32C
0 active listings and RFQs →
EN 10084 C16E
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between BS 970 EN32C and EN 10084 C16E?
Both grades share a similar composition profile; see the specification table above for the exact chemistry and mechanical property values.
Can BS 970 EN32C be substituted with EN 10084 C16E?
BS 970 EN32C and EN 10084 C16E overlap closely enough on chemistry and mechanical properties that EN 10084 C16E is often considered as a substitute for BS 970 EN32C in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.