Post Stock Login Register

BS 970 EN32C vs IS 11169 (Part 1) 15C8

Strong Match — 91.1% match based on chemical composition and mechanical property overlap.

BS 970 EN32C (BS 970:1955) and IS 11169 (Part 1) 15C8 (IS 11169 (Part 1):1984) are both steel grades. Both fall under the Carbon Steel category. BS 970 EN32C is defined under British Standards (BS), originating from United Kingdom, while IS 11169 (Part 1) 15C8 is defined under Bureau of Indian Standards (IS), originating from India.

As per chemical composition, BS 970 EN32C vs IS 11169 (Part 1) 15C8 is a 91.1% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a strong match overall at 91.1%.

Frequently Compared With BS 970 EN32C:
BS 970 (Part 3) 045M10 BS 970 (Part 1) 060A40 BS 970 (Part 1) 040A04 BS 970 (Part 1) 040A12 BS 970 (Part 1) 045A10 BS 970 (Part 1) 045M10 BS 970 (Part 3) 080A15 BS 970 (Part 1) 040A10 BS 970 (Part 3) 045A10 BS 970 (Part 1) 055M15 BS 970 (Part 1) 060A32 BS 970 (Part 1) 045A10
Match Breakdown
CHEMISTRY MATCH
91.1%
MECHANICAL MATCH
No shared data
OVERALL
91.1%
Specifications
Property BS 970 EN32C IS 11169 (Part 1) 15C8
Standard BS 970:1955 IS 11169 (Part 1):1984
Category Carbon Steel Carbon Steel
C (%) 0.10-0.18 0.10-0.20
Si (%) 0.05-0.35 Not specified
Mn (%) 0.60-1.00 0.60-0.90
S (%) <=0.050 Not specified
P (%) <=0.050 Not specified
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property BS 970 EN32C IS 11169 (Part 1) 15C8
Tensile Strength ≥494 MPa (32 tons/sq in, converted) Not specified
Elongation ≥20% Not specified
Condition Core, after heat treatment (lowest-strength condition of the standard) Not specified
Hardness, annealed Not specified <=140 HB
Typical Applications
BS 970 EN32C
Not documented
IS 11169 (Part 1) 15C8
Cold heading and cold extrusion; the standard covers wires, wire rods and bars of 2 to 100 mm diameter (clause 1.1)
Key Differences
Can BS 970 EN32C Be Substituted With IS 11169 (Part 1) 15C8?
BS 970 EN32C and IS 11169 (Part 1) 15C8 overlap closely enough on chemistry and mechanical properties that IS 11169 (Part 1) 15C8 is often considered as a substitute for BS 970 EN32C in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.
On M-EX Right Now
BS 970 EN32C
0 active listings and RFQs →
IS 11169 (Part 1) 15C8
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between BS 970 EN32C and IS 11169 (Part 1) 15C8?
BS 970 EN32C specifies Si, S, P which are not specified for IS 11169 (Part 1) 15C8.
Can BS 970 EN32C be substituted with IS 11169 (Part 1) 15C8?
BS 970 EN32C and IS 11169 (Part 1) 15C8 overlap closely enough on chemistry and mechanical properties that IS 11169 (Part 1) 15C8 is often considered as a substitute for BS 970 EN32C in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.