Post Stock Login Register

BS 970 EN35B vs BS 970 EN35

Strong Match — 96.8% match based on chemical composition and mechanical property overlap.

BS 970 EN35B (BS 970:1955) and BS 970 EN35 (BS 970:1955) are both steel grades. Both fall under the Alloy Steel category. BS 970 EN35B is defined under British Standards (BS), originating from United Kingdom, while BS 970 EN35 is defined under British Standards (BS), originating from United Kingdom.

As per chemical composition, BS 970 EN35B vs BS 970 EN35 is a 96.8% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a strong match overall at 96.8%.

Frequently Compared With BS 970 EN35B:
IS 1570 (Part 4) 105Cr5 IS 1570 (Part 7) 10Cr36Mo10H IS 11169 (Part 1) 10Ni5Cr4 IS 4367 07Cr4Mo6 IS 1570 (Part 4) 07Cr4Mo6 IS 1570 (Part 4) 103Cr4 IS 1570 (Part 4) 103Cr6 IS 4367 10Cr9Mo10 IS 1570 (Part 4) 10Mo6 NF A35-565 100C6 UNI 11234 100Cr6 IS 1570 (Part 4) 10Cr20Mo6
Match Breakdown
CHEMISTRY MATCH
96.8%
MECHANICAL MATCH
No shared data
OVERALL
96.8%
Specifications
Property BS 970 EN35B BS 970 EN35
Standard BS 970:1955 BS 970:1955
Category Alloy Steel Alloy Steel
C (%) 0.23-0.28 0.20-0.28
Si (%) 0.10-0.35 0.10-0.35
Mn (%) 0.30-0.60 0.30-0.60
Ni (%) 1.50-2.00 1.50-2.00
Mo (%) 0.20-0.30 0.20-0.30
S (%) <=0.050 <=0.050
P (%) <=0.050 <=0.050
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property BS 970 EN35B BS 970 EN35
Tensile Strength Not specified ≥849 MPa (55 tons/sq in, converted)
Elongation Not specified ≥15%
Condition Not specified Core, after heat treatment (lowest-strength condition of the standard)
Typical Applications
BS 970 EN35B
Not documented
BS 970 EN35
Bars and billets for forging; forgings and drop-forgings; bars for machining; bright bars. En 35 suitable for tensile strength of 55 tons/sq in min. En 35A and 35B: special applications, composition only (mechanical properties not part of contractual obligations).
Can BS 970 EN35B Be Substituted With BS 970 EN35?
BS 970 EN35B and BS 970 EN35 overlap closely enough on chemistry and mechanical properties that BS 970 EN35 is often considered as a substitute for BS 970 EN35B in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.
On M-EX Right Now
BS 970 EN35B
0 active listings and RFQs →
BS 970 EN35
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between BS 970 EN35B and BS 970 EN35?
Both grades share a similar composition profile; see the specification table above for the exact chemistry and mechanical property values.
Can BS 970 EN35B be substituted with BS 970 EN35?
BS 970 EN35B and BS 970 EN35 overlap closely enough on chemistry and mechanical properties that BS 970 EN35 is often considered as a substitute for BS 970 EN35B in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.