Post Stock Login Register

BS 970 EN3A vs BS 970 EN3C

Strong Match — 95.2% match based on chemical composition and mechanical property overlap.

BS 970 EN3A (BS 970:1955) and BS 970 EN3C (BS 970:1955) are both steel grades. Both fall under the Carbon Steel category. BS 970 EN3A is typically used for bolts, screws, light structural components, while BS 970 EN3C is commonly used for welded fabrications, light structural work. BS 970 EN3A is defined under British Standards (BS), originating from United Kingdom, while BS 970 EN3C is defined under British Standards (BS), originating from United Kingdom.

As per chemical composition, BS 970 EN3A vs BS 970 EN3C is a 92.8% match. As per mechanical properties, the match is 100%. Combined, this makes them a strong match overall at 95.2%.

Frequently Compared With BS 970 EN3A:
BS 970 (Part 1) 040A10 BS 970 (Part 3) 070M55 BS 970 (Part 3) 070M20 BS 970 (Part 1) 040A04 BS 970 (Part 1) 040A12 BS 970 (Part 1) 045A10 BS 970 (Part 1) 045A10 BS 970 (Part 3) 045A10 BS 970 (Part 1) 045M10 BS 970 (Part 1) 045M10 BS 970 (Part 3) 045M10 BS 970 (Part 1) 055M15
Match Breakdown
CHEMISTRY MATCH
92.8%
MECHANICAL MATCH
100%
OVERALL
95.2%
Specifications
Property BS 970 EN3A BS 970 EN3C
Standard BS 970:1955 BS 970:1955
Category Carbon Steel Carbon Steel
C (%) 0.15-0.25 0.17-0.23
Si (%) 0.05-0.35 0.05-0.35
Mn (%) 0.40-0.90 0.60-1.00
S (%) <=0.060 <=0.050
P (%) <=0.060 <=0.050
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property BS 970 EN3A BS 970 EN3C
Tensile Strength ≥432 MPa (28 tons/sq in, converted) ≥432 MPa (28 tons/sq in, converted)
Elongation ≥25% ≥25%
Condition , ruling section 6 in (lowest-strength condition of the standard) , ruling section 6 in (lowest-strength condition of the standard)
Typical Applications
BS 970 EN3A
Bolts, screws, light structural components
BS 970 EN3C
Welded fabrications, light structural work
Can BS 970 EN3A Be Substituted With BS 970 EN3C?
BS 970 EN3A and BS 970 EN3C overlap closely enough on chemistry and mechanical properties that BS 970 EN3C is often considered as a substitute for BS 970 EN3A in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.
Forms & Sizes Available on M-EX
BS 970 EN3A
Round Bar → (5 listings)
Diameter: 40–45 mm (1.57–1.77 in)
Length: 5100–7000 mm (200.79–275.59 in)
BS 970 EN3C
Round Bar → (3 listings)
Diameter: 40–40 mm (1.57–1.57 in)
Length: 6200–6800 mm (244.09–267.72 in)
On M-EX Right Now
BS 970 EN3A
5 active listings and RFQs →
BS 970 EN3C
3 active listings and RFQs →
Frequently Asked Questions
What is the difference between BS 970 EN3A and BS 970 EN3C?
Both grades share a similar composition profile; see the specification table above for the exact chemistry and mechanical property values.
Can BS 970 EN3A be substituted with BS 970 EN3C?
BS 970 EN3A and BS 970 EN3C overlap closely enough on chemistry and mechanical properties that BS 970 EN3C is often considered as a substitute for BS 970 EN3A in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.