Post Stock Login Register

BS 970 EN41C vs GOST 4543 12HN3A

Minimal Match — 35% match based on chemical composition and mechanical property overlap.

BS 970 EN41C (BS 970:1955) and GOST 4543 12HN3A (GOST 4543-2016) are both steel grades. Both fall under the Alloy Steel category. BS 970 EN41C is typically used for precision nitrided components, gauges, while GOST 4543 12HN3A is commonly used for used for gears, pinions, crankshafts, aircraft parts, and transmission components.. BS 970 EN41C is defined under British Standards (BS) (United Kingdom).

As per chemical composition, BS 970 EN41C vs GOST 4543 12HN3A is a 54.3% match. As per mechanical properties, the match is 0%. Combined, this makes them a minimal match overall at 35%.

Frequently Compared With BS 970 EN41C:
NF A35-565 100C6 GB/T 3077 12Cr2Ni4A UNI 11234 100Cr6 IS 1570 (Part 4) 103Cr4 IS 1570 (Part 4) 103Cr6 IS 1570 (Part 4) 10Cr20Mo6 IS 1570 (Part 4) 07Cr4Mo6 IS 1570 (Part 7) 10Cr36Mo10H IS 4367 07Cr4Mo6 IS 1570 (Part 4) 105Cr5 IS 4367 10Cr9Mo10
Other Alloy Steel Grades to Compare With BS 970 EN41C:
EN 10028-2 10CrMo9-10
Match Breakdown
CHEMISTRY MATCH
54.3%
MECHANICAL MATCH
0%
OVERALL
35%
Specifications
Property BS 970 EN41C GOST 4543 12HN3A
Standard BS 970:1955 GOST 4543-2016
Category Alloy Steel Alloy Steel
C (%) 0.38–0.48 0.09-0.16
Mn (%) 0.40–0.70 0.3-0.6
Cr (%) 1.40–1.80 0.6-0.9
Al (%) 0.85–1.20 Not specified
Mo (%) 0.20–0.30 Not specified
Ni (%) Not specified 2.75-3.15
Si (%) Not specified 0.17-0.37
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property BS 970 EN41C GOST 4543 12HN3A
Tensile Strength 900–1050 MPa 850-1050 MPa
Surface Hardness HV ≥950 (nitrided) Not specified
Yield Strength Not specified 685 MPa min
Elongation Not specified 11% min
Hardness Not specified 58-62 HRC (case)
Typical Applications
BS 970 EN41C
Precision nitrided components, gauges
GOST 4543 12HN3A
Used for gears, pinions, crankshafts, aircraft parts, and transmission components.
Key Differences
Can BS 970 EN41C Be Substituted With GOST 4543 12HN3A?
BS 970 EN41C and GOST 4543 12HN3A share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
Forms & Sizes Available on M-EX
BS 970 EN41C
Round Bar → (3 listings)
Diameter: 50–50 mm (1.97–1.97 in)
Length: 5300–5700 mm (208.66–224.41 in)
GOST 4543 12HN3A
Round Bar → (2 listings)
Diameter: 50–50 mm (1.97–1.97 in)
Length: 5600–6600 mm (220.47–259.84 in)
On M-EX Right Now
BS 970 EN41C
3 active listings and RFQs →
GOST 4543 12HN3A
2 active listings and RFQs →
Frequently Asked Questions
What is the difference between BS 970 EN41C and GOST 4543 12HN3A?
BS 970 EN41C specifies Al, Mo which are not specified for GOST 4543 12HN3A. GOST 4543 12HN3A specifies Ni, Si which are not specified for BS 970 EN41C.
Can BS 970 EN41C be substituted with GOST 4543 12HN3A?
BS 970 EN41C and GOST 4543 12HN3A share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.