Strong Match — 93% match
based on chemical composition and mechanical property overlap.
BS 970 EN42 (BS 970:1955) and BS 970 EN42C (BS 970:1955) are both steel grades.
Both fall under the Spring Steel category.
BS 970 EN42 is defined under British Standards (BS), originating from United Kingdom, while BS 970 EN42C is defined under British Standards (BS), originating from United Kingdom.
As per chemical composition, BS 970 EN42 vs BS 970 EN42C is a 93% match.
Mechanical property data is not available for both grades, so this factor could not be scored.
Combined, this makes them a strong match overall at 93%.
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Typical Applications
BS 970 EN42
Springs, chisels, punches, cutting tools
BS 970 EN42C
Not documented
Can BS 970 EN42 Be Substituted With BS 970 EN42C?
BS 970 EN42 and BS 970 EN42C overlap closely enough on chemistry and mechanical properties that BS 970 EN42C is often considered as a substitute for BS 970 EN42 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.
What is the difference between BS 970 EN42 and BS 970 EN42C?
Both grades share a similar composition profile; see the specification table above for the exact chemistry and mechanical property values.
Can BS 970 EN42 be substituted with BS 970 EN42C?
BS 970 EN42 and BS 970 EN42C overlap closely enough on chemistry and mechanical properties that BS 970 EN42C is often considered as a substitute for BS 970 EN42 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.