Post Stock Login Register

BS 970 EN42J vs IS 3195 52Cr4Mo2V

Minimal Match — 35% match based on chemical composition and mechanical property overlap.

BS 970 EN42J (BS 970:1955) and IS 3195 52Cr4Mo2V (IS 3195:1992) are both steel grades. Both fall under the Spring Steel category. BS 970 EN42J is defined under British Standards (BS), originating from United Kingdom, while IS 3195 52Cr4Mo2V is defined under Bureau of Indian Standards (IS), originating from India.

As per chemical composition, BS 970 EN42J vs IS 3195 52Cr4Mo2V is a 59.7% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a minimal match overall at 35%.

Frequently Compared With BS 970 EN42J:
BS 970 EN42C BS 970 EN42 BS 970 EN42D BS 970 EN42F IS 3195 50Cr4V2 EN 10083-1 51CrV4 EN 10083-3 51CrV4 IS 3195 113C6 IS 3431 50Cr4V2 EN 10089 50CrV4 EN 10083-1 51CrV4 IS 5517 55Cr3
Match Breakdown
CHEMISTRY MATCH
59.7%
MECHANICAL MATCH
No shared data
OVERALL
35%
Specifications
Property BS 970 EN42J IS 3195 52Cr4Mo2V
Standard BS 970:1955 IS 3195:1992
Category Spring Steel Spring Steel
C (%) 0.75-0.90 0.48-0.56
Si (%) <=0.35 0.15-0.40
Mn (%) 0.60-0.90 0.70-1.10
S (%) <=0.050 <=0.030
P (%) <=0.050 <=0.030
Cr (%) Not specified 0.90-1.20
Mo (%) Not specified 0.15-0.25
V (%) Not specified 0.07-0.12
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property BS 970 EN42J IS 3195 52Cr4Mo2V
Hardness, annealed Not specified <=255 HB
Hardness, untreated (hot rolled) Not specified about 310 HB (for guidance only)
Typical Applications
BS 970 EN42J
Not documented
IS 3195 52Cr4Mo2V
Volute and helical springs for railway rolling stock; flats and rounds, springs worked hot and heat-treated (clause 1.1, foreword)
Key Differences
Can BS 970 EN42J Be Substituted With IS 3195 52Cr4Mo2V?
BS 970 EN42J and IS 3195 52Cr4Mo2V share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
On M-EX Right Now
BS 970 EN42J
0 active listings and RFQs →
IS 3195 52Cr4Mo2V
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between BS 970 EN42J and IS 3195 52Cr4Mo2V?
IS 3195 52Cr4Mo2V specifies Cr, Mo, V which are not specified for BS 970 EN42J.
Can BS 970 EN42J be substituted with IS 3195 52Cr4Mo2V?
BS 970 EN42J and IS 3195 52Cr4Mo2V share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.