Strong Match — 91.7% match
based on chemical composition and mechanical property overlap.
BS 970 EN43C (BS 970:1955) and BS 970 (Part 3) 080M50 (BS 970 (Part 3):1991) are both steel grades.
Both fall under the Carbon Steel category.
BS 970 EN43C is defined under British Standards (BS), originating from United Kingdom, while BS 970 (Part 3) 080M50 is defined under British Standards (BS), originating from United Kingdom.
As per chemical composition, BS 970 EN43C vs BS 970 (Part 3) 080M50 is a 91.7% match.
Mechanical property data is not available for both grades, so this factor could not be scored.
Combined, this makes them a strong match overall at 91.7%.
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Typical Applications
BS 970 EN43C
Not documented
BS 970 (Part 3) 080M50
Used for shafts, rollers, wear-resistant parts, gears, springs, and machine components.
Can BS 970 EN43C Be Substituted With BS 970 (Part 3) 080M50?
BS 970 EN43C and BS 970 (Part 3) 080M50 overlap closely enough on chemistry and mechanical properties that BS 970 (Part 3) 080M50 is often considered as a substitute for BS 970 EN43C in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.
What is the difference between BS 970 EN43C and BS 970 (Part 3) 080M50?
Both grades share a similar composition profile; see the specification table above for the exact chemistry and mechanical property values.
Can BS 970 EN43C be substituted with BS 970 (Part 3) 080M50?
BS 970 EN43C and BS 970 (Part 3) 080M50 overlap closely enough on chemistry and mechanical properties that BS 970 (Part 3) 080M50 is often considered as a substitute for BS 970 EN43C in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.