Post Stock Login Register

BS 970 EN43E vs BS 970 (Part 1) 070A67

Strong Match — 93.3% match based on chemical composition and mechanical property overlap.

BS 970 EN43E (BS 970:1955) and BS 970 (Part 1) 070A67 (BS 970 (Part 1):1991) are both steel grades. Both fall under the Carbon Steel category. BS 970 EN43E is defined under British Standards (BS), originating from United Kingdom, while BS 970 (Part 1) 070A67 is defined under British Standards (BS), originating from United Kingdom.

As per chemical composition, BS 970 EN43E vs BS 970 (Part 1) 070A67 is a 93.3% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a strong match overall at 93.3%.

Frequently Compared With BS 970 EN43E:
BS 970 (Part 1) 040A04 BS 970 (Part 1) 040A10 BS 970 (Part 1) 040A12 BS 970 (Part 1) 045M10 BS 970 (Part 1) 055M15 BS 970 (Part 1) 060A67 BS 970 (Part 1) 045A10 BS 970 (Part 1) 045A10 BS 970 (Part 3) 045A10 BS 970 (Part 1) 045M10 BS 970 (Part 3) 045M10 BS 970 (Part 1) 060A32
Match Breakdown
CHEMISTRY MATCH
93.3%
MECHANICAL MATCH
No shared data
OVERALL
93.3%
Specifications
Property BS 970 EN43E BS 970 (Part 1) 070A67
Standard BS 970:1955 BS 970 (Part 1):1991
Category Carbon Steel Carbon Steel
C (%) 0.65-0.70 0.65-0.70
Si (%) 0.05-0.35 Not specified
Mn (%) 0.70-0.90 0.70-0.90
S (%) <=0.060 Not specified
P (%) <=0.060 Not specified
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Typical Applications
BS 970 EN43E
Not documented
BS 970 (Part 1) 070A67
As-rolled, or as-rolled and softened, steel (section two)
Key Differences
Can BS 970 EN43E Be Substituted With BS 970 (Part 1) 070A67?
BS 970 EN43E and BS 970 (Part 1) 070A67 overlap closely enough on chemistry and mechanical properties that BS 970 (Part 1) 070A67 is often considered as a substitute for BS 970 EN43E in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.
On M-EX Right Now
BS 970 EN43E
0 active listings and RFQs →
BS 970 (Part 1) 070A67
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between BS 970 EN43E and BS 970 (Part 1) 070A67?
BS 970 EN43E specifies Si, S, P which are not specified for BS 970 (Part 1) 070A67.
Can BS 970 EN43E be substituted with BS 970 (Part 1) 070A67?
BS 970 EN43E and BS 970 (Part 1) 070A67 overlap closely enough on chemistry and mechanical properties that BS 970 (Part 1) 070A67 is often considered as a substitute for BS 970 EN43E in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.