Strong Match — 91.1% match
based on chemical composition and mechanical property overlap.
BS 970 EN45A (BS 970:1955) and BS 970 EN45 (BS 970:1955) are both steel grades.
Both fall under the Spring Steel category.
BS 970 EN45A is defined under British Standards (BS), originating from United Kingdom, while BS 970 EN45 is defined under British Standards (BS), originating from United Kingdom.
As per chemical composition, BS 970 EN45A vs BS 970 EN45 is a 91.1% match.
Mechanical property data is not available for both grades, so this factor could not be scored.
Combined, this makes them a strong match overall at 91.1%.
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Typical Applications
BS 970 EN45A
Not documented
BS 970 EN45
Leaf springs, coil springs, automotive suspension
Can BS 970 EN45A Be Substituted With BS 970 EN45?
BS 970 EN45A and BS 970 EN45 overlap closely enough on chemistry and mechanical properties that BS 970 EN45 is often considered as a substitute for BS 970 EN45A in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.
What is the difference between BS 970 EN45A and BS 970 EN45?
Both grades share a similar composition profile; see the specification table above for the exact chemistry and mechanical property values.
Can BS 970 EN45A be substituted with BS 970 EN45?
BS 970 EN45A and BS 970 EN45 overlap closely enough on chemistry and mechanical properties that BS 970 EN45 is often considered as a substitute for BS 970 EN45A in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.