Post Stock Login Register

BS 970 EN5 vs BS 970 EN5C

Strong Match — 92.9% match based on chemical composition and mechanical property overlap.

BS 970 EN5 (BS 970:1955) and BS 970 EN5C (BS 970:1955) are both steel grades. Both fall under the Carbon Steel category. BS 970 EN5 is typically used for gears, shafts, couplings, general engineering, while BS 970 EN5C is commonly used for mechanical properties are not part of the contractual obligations of specifications en 5a, en 5b and en 5c.. BS 970 EN5 is defined under British Standards (BS), originating from United Kingdom, while BS 970 EN5C is defined under British Standards (BS), originating from United Kingdom.

As per chemical composition, BS 970 EN5 vs BS 970 EN5C is a 92.9% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a strong match overall at 92.9%.

Frequently Compared With BS 970 EN5:
BS 970 (Part 1) 040A10 BS 970 (Part 3) 070M55 BS 970 (Part 1) 060A32 BS 970 (Part 3) 045A10 BS 970 (Part 1) 045M10 BS 970 (Part 1) 070M26 BS 970 (Part 1) 040A04 BS 970 (Part 1) 040A12 BS 970 (Part 1) 045A10 BS 970 (Part 1) 045A10 BS 970 (Part 1) 045M10 BS 970 (Part 3) 045M10
Match Breakdown
CHEMISTRY MATCH
92.9%
MECHANICAL MATCH
No shared data
OVERALL
92.9%
Specifications
Property BS 970 EN5 BS 970 EN5C
Standard BS 970:1955 BS 970:1955
Category Carbon Steel Carbon Steel
C (%) 0.25-0.35 0.30-0.35
Si (%) 0.05-0.35 0.05-0.35
Mn (%) 0.60-1.00 0.70-0.90
S (%) <=0.060 <=0.060
P (%) <=0.060 <=0.060
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property BS 970 EN5 BS 970 EN5C
Tensile Strength ≥494 MPa (32 tons/sq in, converted) Not specified
Yield Strength ≥247 MPa (16 tons/sq in, converted) Not specified
Elongation ≥25% Not specified
Hardness 143-193 HB Not specified
Condition Normalised, ruling section 2 1/2 in (lowest-strength condition of the standard) Not specified
Typical Applications
BS 970 EN5
Gears, shafts, couplings, general engineering
BS 970 EN5C
Mechanical properties are not part of the contractual obligations of specifications En 5A, En 5B and En 5C.
Can BS 970 EN5 Be Substituted With BS 970 EN5C?
BS 970 EN5 and BS 970 EN5C overlap closely enough on chemistry and mechanical properties that BS 970 EN5C is often considered as a substitute for BS 970 EN5 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.
Forms & Sizes Available on M-EX
BS 970 EN5
Round Bar → (3 listings)
Diameter: 50–50 mm (1.97–1.97 in)
Length: 5500–6600 mm (216.54–259.84 in)
Square Bar → (3 listings)
Size: 25–25 mm (0.98–0.98 in)
Length: 5800–7000 mm (228.35–275.59 in)
BS 970 EN5C
No active listings currently.
On M-EX Right Now
BS 970 EN5
6 active listings and RFQs →
BS 970 EN5C
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between BS 970 EN5 and BS 970 EN5C?
Both grades share a similar composition profile; see the specification table above for the exact chemistry and mechanical property values.
Can BS 970 EN5 be substituted with BS 970 EN5C?
BS 970 EN5 and BS 970 EN5C overlap closely enough on chemistry and mechanical properties that BS 970 EN5C is often considered as a substitute for BS 970 EN5 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.