Post Stock Login Register

BS 970 EN52 vs GOST 5632 06Kh23N28

Minimal Match — 35% match based on chemical composition and mechanical property overlap.

BS 970 EN52 (BS 970:1955) and GOST 5632 06Kh23N28 (GOST 5632-2014) are both steel grades. Both fall under the Stainless Steel category. BS 970 EN52 is typically used for bars and billets for forging; forgings and drop-forgings; bars for machining; bright bars., while GOST 5632 06Kh23N28 is commonly used for furnace components, heat exchangers, high temperature applications. BS 970 EN52 is defined under British Standards (BS) (United Kingdom).

As per chemical composition, BS 970 EN52 vs GOST 5632 06Kh23N28 is a 62.8% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a minimal match overall at 35%.

Frequently Compared With BS 970 EN52:
ASTM A959 .- EN 10088-1 1.4845 GOST 5632 08X18H10 IS 1570 (Part 7) 12Cr12MoH IS 1570 (Part 7) 12Cr12Ni2Mo GB/T 3280 06Cr19Ni10 EN 10088-1 1.4006 EN 10088-1 1.4301 EN 10088-1 1.4401 IS 1570 (Part 7) 11Cr17Ni13W3TiH IS 1570 (Part 7) 12Cr12MoVH IS 1570 (Part 7) 12Cr13H
Match Breakdown
CHEMISTRY MATCH
62.8%
MECHANICAL MATCH
No shared data
OVERALL
35%
Specifications
Property BS 970 EN52 GOST 5632 06Kh23N28
Standard BS 970:1955 GOST 5632-2014
Category Stainless Steel Stainless Steel
C (%) 0.40-0.50 ≤0.06
Si (%) 3.00-3.75 ≤0.80
Mn (%) 0.30-0.60 ≤2.00
Ni (%) <=0.50 26.0–29.0
Cr (%) 7.50-9.50 22.0–25.0
S (%) <=0.040 Not specified
P (%) <=0.040 Not specified
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property BS 970 EN52 GOST 5632 06Kh23N28
Tensile Strength Not specified ≥510 MPa
Yield Strength Not specified ≥196 MPa
Elongation Not specified ≥35%
Max Service Temp Not specified 1050°C
Typical Applications
BS 970 EN52
Bars and billets for forging; forgings and drop-forgings; bars for machining; bright bars.
GOST 5632 06Kh23N28
Furnace components, heat exchangers, high temperature applications
Key Differences
Can BS 970 EN52 Be Substituted With GOST 5632 06Kh23N28?
BS 970 EN52 and GOST 5632 06Kh23N28 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
Forms & Sizes Available on M-EX
BS 970 EN52
No active listings currently.
GOST 5632 06Kh23N28
Sheet → (2 listings)
Thickness: 6–6 mm (0.24–0.24 in)
Width: 1250–1250 mm (49.21–49.21 in)
Length: 3100–3400 mm (122.05–133.86 in)
On M-EX Right Now
BS 970 EN52
0 active listings and RFQs →
GOST 5632 06Kh23N28
2 active listings and RFQs →
Frequently Asked Questions
What is the difference between BS 970 EN52 and GOST 5632 06Kh23N28?
BS 970 EN52 specifies S, P which are not specified for GOST 5632 06Kh23N28.
Can BS 970 EN52 be substituted with GOST 5632 06Kh23N28?
BS 970 EN52 and GOST 5632 06Kh23N28 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.