Post Stock Login Register

BS 970 EN54 vs IS 6911 X40Cr13

Related Material — 69.9% match based on chemical composition and mechanical property overlap.

BS 970 EN54 (BS 970:1955) and IS 6911 X40Cr13 (IS 6911:1992) are both steel grades. Both fall under the Stainless Steel category. BS 970 EN54 is typically used for bars and billets for forging; forgings and drop-forgings; bars for machining; bright bars., while IS 6911 X40Cr13 is commonly used for stainless and heat-resisting steel plate, sheet and strip (clause 1.1). BS 970 EN54 is defined under British Standards (BS), originating from United Kingdom, while IS 6911 X40Cr13 is defined under Bureau of Indian Standards (IS), originating from India.

As per chemical composition, BS 970 EN54 vs IS 6911 X40Cr13 is a 70.5% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a related material overall at 69.9%.

Frequently Compared With BS 970 EN54:
EN 10088-1 1.4845 IS 1570 (Part 7) 12Cr12MoH GB/T 3280 06Cr19Ni10 EN 10088-1 1.4006 IS 1570 (Part 7) 12Cr12MoVH IS 1570 (Part 7) 12Cr12Ni2Mo ASTM A959 .- GOST 5632 06Kh23N28 GOST 5632 08X18H10 EN 10088-1 1.4301 EN 10088-1 1.4401 IS 1570 (Part 7) 11Cr17Ni13W3TiH
Match Breakdown
CHEMISTRY MATCH
70.5%
MECHANICAL MATCH
No shared data
OVERALL
69.9%
Specifications
Property BS 970 EN54 IS 6911 X40Cr13
Standard BS 970:1955 IS 6911:1992
Category Stainless Steel Stainless Steel
C (%) 0.35-0.50 0.35-0.45
Si (%) 1.00-2.50 <=1.0
Mn (%) <=1.50 <=1.0
Ni (%) >=10.0 <=1.0
Cr (%) 12.00-16.0 12.0-14.0
W (%) 2.00-4.00 Not specified
S (%) <=0.045 <=0.030
P (%) <=0.045 <=0.040
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property BS 970 EN54 IS 6911 X40Cr13
Hardness (annealed, max) Not specified 255 HBS
Hardness (quenched and tempered, min) Not specified 515 HV, 50 HRC
Typical Applications
BS 970 EN54
Bars and billets for forging; forgings and drop-forgings; bars for machining; bright bars.
IS 6911 X40Cr13
Stainless and heat-resisting steel plate, sheet and strip (clause 1.1)
Key Differences
Can BS 970 EN54 Be Substituted With IS 6911 X40Cr13?
BS 970 EN54 and IS 6911 X40Cr13 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
On M-EX Right Now
BS 970 EN54
0 active listings and RFQs →
IS 6911 X40Cr13
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between BS 970 EN54 and IS 6911 X40Cr13?
BS 970 EN54 specifies W which is not specified for IS 6911 X40Cr13.
Can BS 970 EN54 be substituted with IS 6911 X40Cr13?
BS 970 EN54 and IS 6911 X40Cr13 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.