Post Stock Login Register

BS 970 EN57 vs BS 970 EN60

Close Alternative — 82.1% match based on chemical composition and mechanical property overlap.

BS 970 EN57 (BS 970:1955) and BS 970 EN60 (BS 970:1955) are both steel grades. Both fall under the Stainless Steel category. BS 970 EN57 is typically used for bars and billets for forging; forgings and drop-forgings; bars for machining; bright bars. suitable for tensile strength of 55 tons/sq in min., while BS 970 EN60 is commonly used for bars and billets for forging; forgings and drop-forgings; bars for machining; bright bars.. BS 970 EN57 is defined under British Standards (BS), originating from United Kingdom, while BS 970 EN60 is defined under British Standards (BS), originating from United Kingdom.

As per chemical composition, BS 970 EN57 vs BS 970 EN60 is a 82.1% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a close alternative overall at 82.1%.

Frequently Compared With BS 970 EN57:
EN 10088-1 1.4301 IS 1570 (Part 7) 11Cr17Ni13W3TiH GB/T 3280 06Cr19Ni10 GOST 5632 08X18H10 IS 1570 (Part 7) 12Cr12MoVH ASTM A959 .- GOST 5632 06Kh23N28 EN 10088-1 1.4006 EN 10088-1 1.4401 EN 10088-1 1.4845 IS 1570 (Part 7) 12Cr12MoH IS 1570 (Part 7) 12Cr12Ni2Mo
Match Breakdown
CHEMISTRY MATCH
82.1%
MECHANICAL MATCH
No shared data
OVERALL
82.1%
Specifications
Property BS 970 EN57 BS 970 EN60
Standard BS 970:1955 BS 970:1955
Category Stainless Steel Stainless Steel
C (%) <=0.25 <=0.12
Si (%) 0.10-1.00 <=1.00
Mn (%) <=1.00 <=1.00
Ni (%) 1.00-3.00 <=0.50
Cr (%) 15.5-20.0 16.0-18.0
S (%) <=0.045 <=0.045
P (%) <=0.045 <=0.045
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property BS 970 EN57 BS 970 EN60
Tensile Strength ≥849 MPa (55 tons/sq in, converted) Not specified
Yield Strength ≥680 MPa (44 tons/sq in, converted) Not specified
Elongation ≥15% Not specified
Hardness 248 HB Not specified
Condition Hardened and tempered (ruling 6), ruling section 6 in (lowest-strength condition of the standard) Not specified
Typical Applications
BS 970 EN57
Bars and billets for forging; forgings and drop-forgings; bars for machining; bright bars. Suitable for tensile strength of 55 tons/sq in min.
BS 970 EN60
Bars and billets for forging; forgings and drop-forgings; bars for machining; bright bars.
Can BS 970 EN57 Be Substituted With BS 970 EN60?
BS 970 EN57 and BS 970 EN60 are a close alternative rather than a direct substitute. Some properties overlap well, but check the specific chemistry and mechanical rows above against your application's requirements before treating them as interchangeable.
On M-EX Right Now
BS 970 EN57
0 active listings and RFQs →
BS 970 EN60
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between BS 970 EN57 and BS 970 EN60?
Both grades share a similar composition profile; see the specification table above for the exact chemistry and mechanical property values.
Can BS 970 EN57 be substituted with BS 970 EN60?
BS 970 EN57 and BS 970 EN60 are a close alternative rather than a direct substitute. Some properties overlap well, but check the specific chemistry and mechanical rows above against your application's requirements before treating them as interchangeable.