Strong Match — 94.4% match
based on chemical composition and mechanical property overlap.
BS 970 EN58H (BS 970:1955) and BS 970 EN58J (BS 970:1955) are both steel grades.
Both fall under the Stainless Steel category.
BS 970 EN58H is defined under British Standards (BS), originating from United Kingdom, while BS 970 EN58J is defined under British Standards (BS), originating from United Kingdom.
As per chemical composition, BS 970 EN58H vs BS 970 EN58J is a 91.7% match.
As per mechanical properties, the match is 100%.
Combined, this makes them a strong match overall at 94.4%.
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property
BS 970 EN58H
BS 970 EN58J
Tensile Strength
≥541 MPa (35 tons/sq in, converted)
≥541 MPa (35 tons/sq in, converted)
Yield Strength
≥185 MPa (12 tons/sq in, converted)
≥185 MPa (12 tons/sq in, converted)
Elongation
≥30%
≥30%
Condition
, ruling section 6 in (lowest-strength condition of the standard)
, ruling section 6 in (lowest-strength condition of the standard)
Can BS 970 EN58H Be Substituted With BS 970 EN58J?
BS 970 EN58H and BS 970 EN58J overlap closely enough on chemistry and mechanical properties that BS 970 EN58J is often considered as a substitute for BS 970 EN58H in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.
What is the difference between BS 970 EN58H and BS 970 EN58J?
Both grades share a similar composition profile; see the specification table above for the exact chemistry and mechanical property values.
Can BS 970 EN58H be substituted with BS 970 EN58J?
BS 970 EN58H and BS 970 EN58J overlap closely enough on chemistry and mechanical properties that BS 970 EN58J is often considered as a substitute for BS 970 EN58H in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.