Strong Match — 96% match
based on chemical composition and mechanical property overlap.
BS 970 EN60 (BS 970:1955) and BS 970 (Part 1) 430S17 (BS 970 (Part 1):1991) are both steel grades.
Both fall under the Stainless Steel category.
BS 970 EN60 is typically used for bars and billets for forging; forgings and drop-forgings; bars for machining; bright bars., while BS 970 (Part 1) 430S17 is commonly used for ferritic and martensitic stainless and heat resisting steel (section five).
BS 970 EN60 is defined under British Standards (BS), originating from United Kingdom, while BS 970 (Part 1) 430S17 is defined under British Standards (BS), originating from United Kingdom.
As per chemical composition, BS 970 EN60 vs BS 970 (Part 1) 430S17 is a 96% match.
Mechanical property data is not available for both grades, so this factor could not be scored.
Combined, this makes them a strong match overall at 96%.
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Typical Applications
BS 970 EN60
Bars and billets for forging; forgings and drop-forgings; bars for machining; bright bars.
BS 970 (Part 1) 430S17
Ferritic and martensitic stainless and heat resisting steel (section five)
Can BS 970 EN60 Be Substituted With BS 970 (Part 1) 430S17?
BS 970 EN60 and BS 970 (Part 1) 430S17 overlap closely enough on chemistry and mechanical properties that BS 970 (Part 1) 430S17 is often considered as a substitute for BS 970 EN60 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.
What is the difference between BS 970 EN60 and BS 970 (Part 1) 430S17?
Both grades share a similar composition profile; see the specification table above for the exact chemistry and mechanical property values.
Can BS 970 EN60 be substituted with BS 970 (Part 1) 430S17?
BS 970 EN60 and BS 970 (Part 1) 430S17 overlap closely enough on chemistry and mechanical properties that BS 970 (Part 1) 430S17 is often considered as a substitute for BS 970 EN60 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.