Post Stock Login Register

BS 970 EN8CM vs BS 970 (Part 1) 060A40

Strong Match — 86.4% match based on chemical composition and mechanical property overlap.

BS 970 EN8CM (BS 970:1955) and BS 970 (Part 1) 060A40 (BS 970 (Part 1):1983) are both steel grades. Both fall under the Carbon Steel category. BS 970 EN8CM is defined under British Standards (BS), originating from United Kingdom, while BS 970 (Part 1) 060A40 is defined under British Standards (BS), originating from United Kingdom.

As per chemical composition, BS 970 EN8CM vs BS 970 (Part 1) 060A40 is a 86.4% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a strong match overall at 86.4%.

Frequently Compared With BS 970 EN8CM:
BS 970 (Part 1) 040A04 BS 970 (Part 1) 040A12 BS 970 (Part 3) 045A10 BS 970 (Part 1) 045M10 BS 970 (Part 1) 045M10 BS 970 (Part 1) 045A10 BS 970 (Part 3) 045M10 BS 970 (Part 1) 040A10 BS 970 (Part 1) 045A10 BS 970 (Part 1) 055M15 BS 970 (Part 1) 060A32 BS 970 (Part 1) 060A45
Match Breakdown
CHEMISTRY MATCH
86.4%
MECHANICAL MATCH
No shared data
OVERALL
86.4%
Specifications
Property BS 970 EN8CM BS 970 (Part 1) 060A40
Standard BS 970:1955 BS 970 (Part 1):1983
Category Carbon Steel Carbon Steel
C (%) 0.38-0.43 0.38-0.43
Si (%) <=0.25 Not specified
Mn (%) 0.90-1.30 0.50-0.70
S (%) 0.12-0.20 <=0.050
P (%) <=0.060 <=0.050
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property BS 970 EN8CM BS 970 (Part 1) 060A40
Tensile Strength ≥541 MPa (35 tons/sq in, converted) Not specified
Yield Strength ≥278 MPa (18 tons/sq in, converted) Not specified
Elongation ≥20% Not specified
Hardness 152-207 HB Not specified
Condition Normalised, ruling section 6 in (lowest-strength condition of the standard) Not specified
Typical Applications
BS 970 EN8CM
Not documented
BS 970 (Part 1) 060A40
Through hardening steel for mechanical and allied engineering purposes; supplied in the hardened and tempered conditions of Table 6.
Key Differences
Can BS 970 EN8CM Be Substituted With BS 970 (Part 1) 060A40?
BS 970 EN8CM and BS 970 (Part 1) 060A40 overlap closely enough on chemistry and mechanical properties that BS 970 (Part 1) 060A40 is often considered as a substitute for BS 970 EN8CM in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.
On M-EX Right Now
BS 970 EN8CM
0 active listings and RFQs →
BS 970 (Part 1) 060A40
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between BS 970 EN8CM and BS 970 (Part 1) 060A40?
BS 970 EN8CM specifies Si which is not specified for BS 970 (Part 1) 060A40.
Can BS 970 EN8CM be substituted with BS 970 (Part 1) 060A40?
BS 970 EN8CM and BS 970 (Part 1) 060A40 overlap closely enough on chemistry and mechanical properties that BS 970 (Part 1) 060A40 is often considered as a substitute for BS 970 EN8CM in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.