BS 970 (Part 3) 320S31 vs EN 10088-1 X6CrNiMoNb17-12-2
Strong Match — 96.2% match
based on chemical composition and mechanical property overlap.
BS 970 (Part 3) 320S31 (BS 970 (Part 3):1991) and EN 10088-1 X6CrNiMoNb17-12-2 (EN 10088-1:2014) are both steel grades.
Both fall under the Stainless Steel category.
BS 970 (Part 3) 320S31 is defined under British Standards (BS), originating from United Kingdom, while EN 10088-1 X6CrNiMoNb17-12-2 is defined under European Standard (EN), originating from Europe.
As per chemical composition, BS 970 (Part 3) 320S31 vs EN 10088-1 X6CrNiMoNb17-12-2 is a 96.2% match.
Mechanical property data is not available for both grades, so this factor could not be scored.
Combined, this makes them a strong match overall at 96.2%.
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Typical Applications
BS 970 (Part 3) 320S31
Bright cold finished bars (cold drawn, turned or precision ground) for general engineering purposes, in straight lengths; austenitic stainless and heat resisting steel (Table 18)
EN 10088-1 X6CrNiMoNb17-12-2
Not documented
Can BS 970 (Part 3) 320S31 Be Substituted With EN 10088-1 X6CrNiMoNb17-12-2?
BS 970 (Part 3) 320S31 and EN 10088-1 X6CrNiMoNb17-12-2 overlap closely enough on chemistry and mechanical properties that EN 10088-1 X6CrNiMoNb17-12-2 is often considered as a substitute for BS 970 (Part 3) 320S31 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.
What is the difference between BS 970 (Part 3) 320S31 and EN 10088-1 X6CrNiMoNb17-12-2?
Both grades share a similar composition profile; see the specification table above for the exact chemistry and mechanical property values.
Can BS 970 (Part 3) 320S31 be substituted with EN 10088-1 X6CrNiMoNb17-12-2?
BS 970 (Part 3) 320S31 and EN 10088-1 X6CrNiMoNb17-12-2 overlap closely enough on chemistry and mechanical properties that EN 10088-1 X6CrNiMoNb17-12-2 is often considered as a substitute for BS 970 (Part 3) 320S31 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.