Post Stock Login Register

BS 970 (Part 3) 416S29 vs IS 1570 (Part 7) 20Cr12MoNiVH

Related Material — 64.7% match based on chemical composition and mechanical property overlap.

BS 970 (Part 3) 416S29 (BS 970 (Part 3):1991) and IS 1570 (Part 7) 20Cr12MoNiVH (IS 1570 (Part 7):1992) are both steel grades. Both fall under the Stainless Steel category. BS 970 (Part 3) 416S29 is typically used for bright cold finished bars (cold drawn, turned or precision ground) for general engineering purposes, in straight lengths; martensitic stainless steel (table 17), while IS 1570 (Part 7) 20Cr12MoNiVH is commonly used for boilers, pressure vessels, steam turbines, steam and water piping and other power plant equipment working at elevated temperature. BS 970 (Part 3) 416S29 is defined under British Standards (BS), originating from United Kingdom, while IS 1570 (Part 7) 20Cr12MoNiVH is defined under Bureau of Indian Standards (IS), originating from India.

As per chemical composition, BS 970 (Part 3) 416S29 vs IS 1570 (Part 7) 20Cr12MoNiVH is a 64.7% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a related material overall at 64.7%.

Frequently Compared With BS 970 (Part 3) 416S29:
GB/T 3280 06Cr19Ni10 EN 10088-1 1.4301 EN 10088-1 1.4845 GOST 5632 06Kh23N28 GOST 5632 08X18H10 EN 10088-1 1.4006 EN 10088-1 1.4401 IS 1570 (Part 7) 11Cr17Ni13W3TiH IS 1570 (Part 7) 12Cr12MoH IS 1570 (Part 7) 12Cr12Ni2Mo ASTM A959 .- IS 1570 (Part 7) 12Cr12MoVH
Match Breakdown
CHEMISTRY MATCH
64.7%
MECHANICAL MATCH
No shared data
OVERALL
64.7%
Specifications
Property BS 970 (Part 3) 416S29 IS 1570 (Part 7) 20Cr12MoNiVH
Standard BS 970 (Part 3):1991 IS 1570 (Part 7):1992
Category Stainless Steel Stainless Steel
C (%) 0.14-0.20 0.17-0.23
Si (%) <=1.0 <=0.50
Mn (%) <=1.5 <=1.00
P (%) <=0.060 <=0.040
S (%) 0.15-0.35 <=0.030
Cr (%) 11.5-13.5 11.0-12.50
Mo (%) <=0.60 0.7-1.20
Ni (%) <=1.00 0.30-1.00
V (%) Not specified 0.20-0.35
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property BS 970 (Part 3) 416S29 IS 1570 (Part 7) 20Cr12MoNiVH
Tensile Strength Not specified 780-930 MPa
Yield Strength Not specified >=590 MPa (0.2 % proof stress)
Elongation Not specified >=14%
Condition Not specified Bars, forgings, Q+T1, thickness up to 250 (first row of Table 3)
Typical Applications
BS 970 (Part 3) 416S29
Bright cold finished bars (cold drawn, turned or precision ground) for general engineering purposes, in straight lengths; martensitic stainless steel (Table 17)
IS 1570 (Part 7) 20Cr12MoNiVH
Boilers, pressure vessels, steam turbines, steam and water piping and other power plant equipment working at elevated temperature
Key Differences
Can BS 970 (Part 3) 416S29 Be Substituted With IS 1570 (Part 7) 20Cr12MoNiVH?
BS 970 (Part 3) 416S29 and IS 1570 (Part 7) 20Cr12MoNiVH share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
On M-EX Right Now
BS 970 (Part 3) 416S29
0 active listings and RFQs →
IS 1570 (Part 7) 20Cr12MoNiVH
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between BS 970 (Part 3) 416S29 and IS 1570 (Part 7) 20Cr12MoNiVH?
IS 1570 (Part 7) 20Cr12MoNiVH specifies V which is not specified for BS 970 (Part 3) 416S29.
Can BS 970 (Part 3) 416S29 be substituted with IS 1570 (Part 7) 20Cr12MoNiVH?
BS 970 (Part 3) 416S29 and IS 1570 (Part 7) 20Cr12MoNiVH share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.