Post Stock Login Register

BS 970 (Part 3) 722M24 vs IS 1570 (Part 4) 103Cr4

Minimal Match — 35% match based on chemical composition and mechanical property overlap.

BS 970 (Part 3) 722M24 (BS 970 (Part 3):1991) and IS 1570 (Part 4) 103Cr4 (IS 1570 (Part 4):1988) are both steel grades. Both fall under the Alloy Steel category. BS 970 (Part 3) 722M24 is defined under British Standards (BS), originating from United Kingdom, while IS 1570 (Part 4) 103Cr4 is defined under Bureau of Indian Standards (IS), originating from India.

As per chemical composition, BS 970 (Part 3) 722M24 vs IS 1570 (Part 4) 103Cr4 is a 66.2% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a minimal match overall at 35%.

Frequently Compared With BS 970 (Part 3) 722M24:
IS 1570 (Part 7) 10Mo6H IS 1570 (Part 7) 12Cr2Mo5V2H IS 1570 (Part 7) 12Cr9Mo10H NF A35-565 100C6 IS 1570 (Part 4) 103Cr6 IS 1570 (Part 7) 12Cr4Mo5H IS 4367 07Cr4Mo6 IS 1570 (Part 4) 10Mo6 IS 1570 (Part 4) 07Cr4Mo6 UNI 11234 100Cr6 IS 1570 (Part 4) 105Cr5 IS 1570 (Part 7) 10Cr36Mo10H
Match Breakdown
CHEMISTRY MATCH
66.2%
MECHANICAL MATCH
No shared data
OVERALL
35%
Specifications
Property BS 970 (Part 3) 722M24 IS 1570 (Part 4) 103Cr4
Standard BS 970 (Part 3):1991 IS 1570 (Part 4):1988
Category Alloy Steel Alloy Steel
C (%) 0.20-0.28 0.95-1.10
Si (%) 0.10-0.40 0.10-0.35
Mn (%) 0.45-0.70 0.25-0.45
P (%) <=0.035 Not specified
S (%) <=0.040 Not specified
Cr (%) 3.00-3.50 0.90-1.20
Mo (%) 0.45-0.65 Not specified
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Typical Applications
BS 970 (Part 3) 722M24
Bright cold finished bars (cold drawn, turned or precision ground) for general engineering purposes, in straight lengths; alloy direct hardening steel (Table 16)
IS 1570 (Part 4) 103Cr4
Not documented
Key Differences
Can BS 970 (Part 3) 722M24 Be Substituted With IS 1570 (Part 4) 103Cr4?
BS 970 (Part 3) 722M24 and IS 1570 (Part 4) 103Cr4 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
On M-EX Right Now
BS 970 (Part 3) 722M24
0 active listings and RFQs →
IS 1570 (Part 4) 103Cr4
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between BS 970 (Part 3) 722M24 and IS 1570 (Part 4) 103Cr4?
BS 970 (Part 3) 722M24 specifies P, S, Mo which are not specified for IS 1570 (Part 4) 103Cr4.
Can BS 970 (Part 3) 722M24 be substituted with IS 1570 (Part 4) 103Cr4?
BS 970 (Part 3) 722M24 and IS 1570 (Part 4) 103Cr4 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.