Post Stock Login Register

DIN 17210 30NiCrMo2-2 vs IS 4367 07Cr4Mo6

Minimal Match — 39% match based on chemical composition and mechanical property overlap.

DIN 17210 30NiCrMo2-2 (DIN 17210:1986) and IS 4367 07Cr4Mo6 (IS 4367:1991) are both steel grades. Both fall under the Alloy Steel category. DIN 17210 30NiCrMo2-2 is defined under Deutsches Institut fur Normung (DIN), originating from Germany, while IS 4367 07Cr4Mo6 is defined under Bureau of Indian Standards (IS), originating from India.

As per chemical composition, DIN 17210 30NiCrMo2-2 vs IS 4367 07Cr4Mo6 is a 58.6% match. As per mechanical properties, the match is 0%. Combined, this makes them a minimal match overall at 39%.

Frequently Compared With DIN 17210 30NiCrMo2-2:
NF A35-565 100C6 GB/T 3077 12Cr2Ni4A GOST 4543 12HN3A UNI 11234 100Cr6 IS 1570 (Part 4) 105Cr5 IS 1570 (Part 4) 103Cr6 IS 1570 (Part 4) 07Cr4Mo6 IS 1570 (Part 4) 10Cr20Mo6 IS 4367 10Cr9Mo10 IS 1570 (Part 4) 103Cr4 IS 1570 (Part 7) 10Cr36Mo10H EN 10028-2 10CrMo9-10
Match Breakdown
CHEMISTRY MATCH
58.6%
MECHANICAL MATCH
0%
OVERALL
39%
Specifications
Property DIN 17210 30NiCrMo2-2 IS 4367 07Cr4Mo6
Standard DIN 17210:1986 IS 4367:1991
Category Alloy Steel Alloy Steel
C (%) 0.26-0.34 <=0.12
Mn (%) 0.55-0.85 0.40-0.70
Si (%) <=0.40 0.15-0.60
P (%) <=0.035 <=0.035
S (%) <=0.035 <=0.035
Cr (%) 0.35-0.65 0.70-1.10
Ni (%) 0.40-0.70 <=0.30
Mo (%) 0.15-0.25 0.45-0.65
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property DIN 17210 30NiCrMo2-2 IS 4367 07Cr4Mo6
Tensile Strength 880-1080 MPa 380-550 MPa
Yield Strength 685 MPa min 225 MPa min
Elongation 10% min >=19%
Hardness 255-311 HB Not specified
Izod Impact Not specified 60 J min
Hardness (soft annealed) Not specified <=170 HB
Condition Not specified Normalised and tempered, ruling section up to 40 mm
Typical Applications
DIN 17210 30NiCrMo2-2
Nickel-chromium-molybdenum case-hardening (carburizing) steel; highly stressed gears, shafts, and transmission components requiring high core strength and wear-resistant carburized surface
IS 4367 07Cr4Mo6
Not documented
Can DIN 17210 30NiCrMo2-2 Be Substituted With IS 4367 07Cr4Mo6?
DIN 17210 30NiCrMo2-2 and IS 4367 07Cr4Mo6 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
Forms & Sizes Available on M-EX
DIN 17210 30NiCrMo2-2
Round Bar → (2 listings)
Diameter: 50–50 mm (1.97–1.97 in)
Length: 5300–5800 mm (208.66–228.35 in)
IS 4367 07Cr4Mo6
No active listings currently.
On M-EX Right Now
DIN 17210 30NiCrMo2-2
2 active listings and RFQs →
IS 4367 07Cr4Mo6
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between DIN 17210 30NiCrMo2-2 and IS 4367 07Cr4Mo6?
Both grades share a similar composition profile; see the specification table above for the exact chemistry and mechanical property values.
Can DIN 17210 30NiCrMo2-2 be substituted with IS 4367 07Cr4Mo6?
DIN 17210 30NiCrMo2-2 and IS 4367 07Cr4Mo6 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.