Related Material — 59.5% match
based on chemical composition and mechanical property overlap.
EN 10025-2 S275J2 (EN 10025-2:2019) and CSA G40.21 480W (CSA G40.21-13 (R2023)) are both steel grades.
Both fall under the Structural Steel category.
EN 10025-2 S275J2 is typically used for hot rolled products of structural steels, while CSA G40.21 480W is commonly used for heavy cranes, offshore structures, high-rise building frames, pressure vessels, heavy mining equipment..
EN 10025-2 S275J2 is defined under European Standard (EN), originating from Europe, while CSA G40.21 480W is defined under Canadian Standards Association (CSA), originating from Canada.
As per chemical composition, EN 10025-2 S275J2 vs CSA G40.21 480W is a 89.2% match.
As per mechanical properties, the match is 0%.
Combined, this makes them a related material overall at 59.5%.
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property
EN 10025-2 S275J2
CSA G40.21 480W
Tensile Strength
410-560 MPa
590-790 MPa
Yield Strength
>=275 MPa
480 MPa min
Elongation
>=23%
Not specified
Condition
Nominal thickness up to 16 mm (tensile for 3 to 100 mm, elongation for 3 to 40 mm), longitudinal test pieces
Not specified
Typical Applications
EN 10025-2 S275J2
Hot rolled products of structural steels
CSA G40.21 480W
Heavy cranes, offshore structures, high-rise building frames, pressure vessels, heavy mining equipment.
Key Differences
EN 10025-2 S275J2 specifies Cu which is not specified for CSA G40.21 480W.
CSA G40.21 480W specifies Si which is not specified for EN 10025-2 S275J2.
Can EN 10025-2 S275J2 Be Substituted With CSA G40.21 480W?
EN 10025-2 S275J2 and CSA G40.21 480W share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
What is the difference between EN 10025-2 S275J2 and CSA G40.21 480W?
EN 10025-2 S275J2 specifies Cu which is not specified for CSA G40.21 480W. CSA G40.21 480W specifies Si which is not specified for EN 10025-2 S275J2.
Can EN 10025-2 S275J2 be substituted with CSA G40.21 480W?
EN 10025-2 S275J2 and CSA G40.21 480W share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.