Post Stock Login Register

EN 10025-2 S460J0 vs EN 10025-3 S460

Strong Match — 94.5% match based on chemical composition and mechanical property overlap.

EN 10025-2 S460J0 (EN 10025-2:2019) and EN 10025-3 S460 (EN 10025-3:2019) are both steel grades. Both fall under the Structural Steel category. EN 10025-2 S460J0 is typically used for hot rolled products of structural steels, while EN 10025-3 S460 is commonly used for used in structural frameworks, lifting equipment, pressure-support structures, transport chassis, and construction machinery.. EN 10025-2 S460J0 is defined under European Standard (EN), originating from Europe, while EN 10025-3 S460 is defined under European Standard (EN), originating from Europe.

As per chemical composition, EN 10025-2 S460J0 vs EN 10025-3 S460 is a 92.7% match. As per mechanical properties, the match is 98.1%. Combined, this makes them a strong match overall at 94.5%.

Frequently Compared With EN 10025-2 S460J0:
CSA G40.21 400A GOST 19281 09G2S CSA G40.21 260W AS/NZS 3679.1 300 CSA G40.21 300W AS/NZS 3679.1 350 CSA G40.21 350W CSA G40.21 400W CSA G40.21 480W ASTM A1008 SS Grade 50 ASTM A1008 SS Grade 80 ASTM A283C
Match Breakdown
CHEMISTRY MATCH
92.7%
MECHANICAL MATCH
98.1%
OVERALL
94.5%
Specifications
Property EN 10025-2 S460J0 EN 10025-3 S460
Standard EN 10025-2:2019 EN 10025-3:2019
Category Structural Steel Structural Steel
C (%) <=0.20 0.20 max
Si (%) <=0.55 0.60 max
Mn (%) <=1.70 1.70 max
P (%) <=0.030 0.025 max
S (%) <=0.030 0.020 max
N (%) <=0.025 Not specified
Cu (%) <=0.55 Not specified
Nb (%) <=0.05 0.06 max
V (%) <=0.13 0.12 max
Ti (%) <=0.05 0.05 max
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property EN 10025-2 S460J0 EN 10025-3 S460
Tensile Strength 550-720 MPa 540-720 MPa
Yield Strength >=460 MPa 460 MPa min
Elongation >=17% 17% min
Condition Nominal thickness up to 16 mm (tensile for 3 to 100 mm, elongation for 3 to 40 mm), longitudinal test pieces Not specified
Hardness Not specified 180-230 HB
Typical Applications
EN 10025-2 S460J0
Hot rolled products of structural steels
EN 10025-3 S460
Used in structural frameworks, lifting equipment, pressure-support structures, transport chassis, and construction machinery.
Key Differences
Can EN 10025-2 S460J0 Be Substituted With EN 10025-3 S460?
EN 10025-2 S460J0 and EN 10025-3 S460 overlap closely enough on chemistry and mechanical properties that EN 10025-3 S460 is often considered as a substitute for EN 10025-2 S460J0 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.
Forms & Sizes Available on M-EX
EN 10025-2 S460J0
No active listings currently.
EN 10025-3 S460
Plate → (2 listings)
Thickness: 10–10 mm (0.39–0.39 in)
Width: 1500–1500 mm (59.06–59.06 in)
Length: 2700–4400 mm (106.3–173.23 in)
On M-EX Right Now
EN 10025-2 S460J0
0 active listings and RFQs →
EN 10025-3 S460
2 active listings and RFQs →
Frequently Asked Questions
What is the difference between EN 10025-2 S460J0 and EN 10025-3 S460?
EN 10025-2 S460J0 specifies N, Cu which are not specified for EN 10025-3 S460.
Can EN 10025-2 S460J0 be substituted with EN 10025-3 S460?
EN 10025-2 S460J0 and EN 10025-3 S460 overlap closely enough on chemistry and mechanical properties that EN 10025-3 S460 is often considered as a substitute for EN 10025-2 S460J0 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.