Strong Match — 98.7% match
based on chemical composition and mechanical property overlap.
EN 10025-3 S275N (EN 10025-3:2019) and EN 10025-3 S275NL (EN 10025-3:2019) are both steel grades.
Both fall under the Structural Steel category.
EN 10025-3 S275N is defined under European Standard (EN), originating from Europe, while EN 10025-3 S275NL is defined under European Standard (EN), originating from Europe.
As per chemical composition, EN 10025-3 S275N vs EN 10025-3 S275NL is a 98% match.
As per mechanical properties, the match is 100%.
Combined, this makes them a strong match overall at 98.7%.
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property
EN 10025-3 S275N
EN 10025-3 S275NL
Tensile Strength
370-510 MPa
370-510 MPa
Yield Strength
>=275 MPa
>=275 MPa
Elongation
>=24%
>=24%
Condition
Normalized or normalized rolled (N), nominal thickness up to 16 mm (tensile strength up to 100 mm), Table 4
Normalized or normalized rolled (N), nominal thickness up to 16 mm (tensile strength up to 100 mm), Table 4
Can EN 10025-3 S275N Be Substituted With EN 10025-3 S275NL?
EN 10025-3 S275N and EN 10025-3 S275NL overlap closely enough on chemistry and mechanical properties that EN 10025-3 S275NL is often considered as a substitute for EN 10025-3 S275N in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.
What is the difference between EN 10025-3 S275N and EN 10025-3 S275NL?
Both grades share a similar composition profile; see the specification table above for the exact chemistry and mechanical property values.
Can EN 10025-3 S275N be substituted with EN 10025-3 S275NL?
EN 10025-3 S275N and EN 10025-3 S275NL overlap closely enough on chemistry and mechanical properties that EN 10025-3 S275NL is often considered as a substitute for EN 10025-3 S275N in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.