Post Stock Login Register

EN 10025-3 S355NL vs ASTM A283C

Minimal Match — 35% match based on chemical composition and mechanical property overlap.

EN 10025-3 S355NL (EN 10025-3:2019) and ASTM A283C (ASTM A283) are both steel grades. Both fall under the Structural Steel category. EN 10025-3 S355NL is defined under European Standard (EN), originating from Europe, while ASTM A283C is defined under ASTM International, originating from United States.

As per chemical composition, EN 10025-3 S355NL vs ASTM A283C is a 58.8% match. As per mechanical properties, the match is 6%. Combined, this makes them a minimal match overall at 35%.

Frequently Compared With EN 10025-3 S355NL:
ASTM A1008 SS Grade 50 GOST 19281 09G2S CSA G40.21 260W AS/NZS 3679.1 300 CSA G40.21 300W AS/NZS 3679.1 350 CSA G40.21 350W CSA G40.21 400A CSA G40.21 400W CSA G40.21 480W ASTM A1008 SS Grade 80 ASTM A572 Gr.65
Match Breakdown
CHEMISTRY MATCH
58.8%
MECHANICAL MATCH
6%
OVERALL
35%
Specifications
Property EN 10025-3 S355NL ASTM A283C
Standard EN 10025-3:2019 ASTM A283
Category Structural Steel Structural Steel
C (%) <=0.18 0.24 max
Si (%) <=0.50 0.40 max
Mn (%) 0.90-1.65 0.90 max
P (%) <=0.025 0.035 max
S (%) <=0.020 0.040 max
Nb (%) <=0.05 Not specified
V (%) <=0.12 Not specified
Ni (%) <=0.50 Not specified
N (%) <=0.015 Not specified
Al (%) >=0.02 Not specified
Ti (%) <=0.05 Not specified
Cr (%) <=0.30 Not specified
Mo (%) <=0.10 Not specified
Cu (%) <=0.55 Not specified
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property EN 10025-3 S355NL ASTM A283C
Tensile Strength 470-630 MPa 380-515 MPa
Yield Strength >=355 MPa 205 MPa min
Elongation >=22% 23-27%
Condition Normalized or normalized rolled (N), nominal thickness up to 16 mm (tensile strength up to 100 mm), Table 4 Not specified
Hardness Not specified 120-170 HB
Typical Applications
EN 10025-3 S355NL
Not documented
ASTM A283C
Used for structural fabrication, storage tanks, buildings, bridges, machinery bases, and welded structures.
Key Differences
Can EN 10025-3 S355NL Be Substituted With ASTM A283C?
EN 10025-3 S355NL and ASTM A283C share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
Forms & Sizes Available on M-EX
EN 10025-3 S355NL
No active listings currently.
ASTM A283C
Plate → (2 listings)
Thickness: 10–10 mm (0.39–0.39 in)
Width: 1500–1500 mm (59.06–59.06 in)
Length: 2900–3700 mm (114.17–145.67 in)
On M-EX Right Now
EN 10025-3 S355NL
0 active listings and RFQs →
ASTM A283C
2 active listings and RFQs →
Frequently Asked Questions
What is the difference between EN 10025-3 S355NL and ASTM A283C?
EN 10025-3 S355NL specifies Nb, V, Ni, N which are not specified for ASTM A283C.
Can EN 10025-3 S355NL be substituted with ASTM A283C?
EN 10025-3 S355NL and ASTM A283C share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.