Related Material — 61.7% match
based on chemical composition and mechanical property overlap.
EN 10025-5 S460J5W (EN 10025-5:2019) and CSA G40.21 480A (CSA G40.21-13 (R2023)) are both steel grades.
Both fall under the Structural Steel (Corten / Weathering) category.
EN 10025-5 S460J5W is defined under European Standard (EN), originating from Europe, while CSA G40.21 480A is defined under Canadian Standards Association (CSA), originating from Canada.
As per chemical composition, EN 10025-5 S460J5W vs CSA G40.21 480A is a 86% match.
As per mechanical properties, the match is 13%.
Combined, this makes them a related material overall at 61.7%.
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property
EN 10025-5 S460J5W
CSA G40.21 480A
Tensile Strength
530-710 MPa
620-760 MPa
Yield Strength
>=460 MPa
480 MPa min
Elongation
>=17%
15% min
Condition
Nominal thickness up to 16 mm for yield, 3 to 100 mm for tensile, 3 to 40 mm for elongation (Lo = 5.65 sqrt(S0), longitudinal); transverse values are lower, see blocks
EN 10025-5 S460J5W specifies N which is not specified for CSA G40.21 480A.
Can EN 10025-5 S460J5W Be Substituted With CSA G40.21 480A?
EN 10025-5 S460J5W and CSA G40.21 480A share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
What is the difference between EN 10025-5 S460J5W and CSA G40.21 480A?
EN 10025-5 S460J5W specifies N which is not specified for CSA G40.21 480A.
Can EN 10025-5 S460J5W be substituted with CSA G40.21 480A?
EN 10025-5 S460J5W and CSA G40.21 480A share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.