Post Stock Login Register

EN 10028-2 12CrMoV12-10 vs EN 10028-2 13CrMoV9-10

Strong Match — 87.7% match based on chemical composition and mechanical property overlap.

EN 10028-2 12CrMoV12-10 (EN 10028-2:2017) and EN 10028-2 13CrMoV9-10 (EN 10028-2:2017) are both steel grades. Both fall under the Alloy Steel category. EN 10028-2 12CrMoV12-10 is typically used for flat products for pressure purposes, while EN 10028-2 13CrMoV9-10 is commonly used for flat products for pressure purposes. EN 10028-2 12CrMoV12-10 is defined under European Standard (EN), originating from Europe, while EN 10028-2 13CrMoV9-10 is defined under European Standard (EN), originating from Europe.

As per chemical composition, EN 10028-2 12CrMoV12-10 vs EN 10028-2 13CrMoV9-10 is a 81.5% match. As per mechanical properties, the match is 100%. Combined, this makes them a strong match overall at 87.7%.

Frequently Compared With EN 10028-2 12CrMoV12-10:
EN 10028-2 12CrMo9-10 UNI 11234 100Cr6 NF A35-565 100C6 IS 1570 (Part 4) 103Cr6 IS 1570 (Part 7) 10Cr36Mo10H EN 10028-2 10CrMo9-10 IS 4367 07Cr4Mo6 IS 1570 (Part 4) 103Cr4 IS 1570 (Part 4) 105Cr5 IS 1570 (Part 4) 10Cr20Mo6 IS 4367 10Cr9Mo10 IS 1570 (Part 4) 10Mo6
Match Breakdown
CHEMISTRY MATCH
81.5%
MECHANICAL MATCH
100%
OVERALL
87.7%
Specifications
Property EN 10028-2 12CrMoV12-10 EN 10028-2 13CrMoV9-10
Standard EN 10028-2:2017 EN 10028-2:2017
Category Alloy Steel Alloy Steel
C (%) 0.10-0.15 0.11-0.15
Si (%) <=0.15 <=0.10
Mn (%) 0.30-0.60 0.30-0.60
P (%) <=0.015 <=0.015
S (%) <=0.005 <=0.005
N (%) <=0.012 <=0.012
Cr (%) 2.75-3.25 2.00-2.50
Cu (%) <=0.25 <=0.20
Mo (%) 0.90-1.10 0.90-1.10
Nb (%) <=0.07 <=0.07
Ni (%) <=0.25 <=0.25
Ti (%) <=0.03 <=0.03
V (%) 0.20-0.30 0.25-0.35
B (%) <=0.003 <=0.002
Ca (%) <=0.015 <=0.015
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property EN 10028-2 12CrMoV12-10 EN 10028-2 13CrMoV9-10
Tensile Strength 600-780 MPa 600-780 MPa
Yield Strength >=455 MPa >=455 MPa
Elongation >=18% >=18%
Condition Usual delivery condition normalized and tempered (+NT), nominal thickness up to 60 mm; transverse direction, Yield Strength is ReH, Elongation is A Usual delivery condition normalized and tempered (+NT), nominal thickness up to 60 mm; transverse direction, Yield Strength is ReH, Elongation is A
Typical Applications
EN 10028-2 12CrMoV12-10
Flat products for pressure purposes
EN 10028-2 13CrMoV9-10
Flat products for pressure purposes
Can EN 10028-2 12CrMoV12-10 Be Substituted With EN 10028-2 13CrMoV9-10?
EN 10028-2 12CrMoV12-10 and EN 10028-2 13CrMoV9-10 overlap closely enough on chemistry and mechanical properties that EN 10028-2 13CrMoV9-10 is often considered as a substitute for EN 10028-2 12CrMoV12-10 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.
On M-EX Right Now
EN 10028-2 12CrMoV12-10
0 active listings and RFQs →
EN 10028-2 13CrMoV9-10
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between EN 10028-2 12CrMoV12-10 and EN 10028-2 13CrMoV9-10?
Both grades share a similar composition profile; see the specification table above for the exact chemistry and mechanical property values.
Can EN 10028-2 12CrMoV12-10 be substituted with EN 10028-2 13CrMoV9-10?
EN 10028-2 12CrMoV12-10 and EN 10028-2 13CrMoV9-10 overlap closely enough on chemistry and mechanical properties that EN 10028-2 13CrMoV9-10 is often considered as a substitute for EN 10028-2 12CrMoV12-10 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.